shipping container house:

1. Material: ISO standard shipping containers

2. Insulation material: 50mm-thick EPS sandwich panel

3. Wall: 50mm-thick EPS sandwich panel with wall paper

4. Ceiling: integrated ceiling

5. Partition wall: 50mm-thick sandwich panel with wall paper

6. Windows: PVC or Aluminum sliding window or roller shutter window

7. Doors: Steel security door, sandwich panel door, sliding door

8. Floor: composite wooden floor tiles, Vynil cover and ceramic tiles for bath room

9. Electrical system: AS/NZS standard, BS standard, VDE standard, UL standard, GB standard etc.

10. Water pipe: PPR, PEX-b, PAP etc.

11. Sewage pipe: PVC etc.

12. Light: ceiling light or fluorescent light

13. Facilities: shower cubicle, toilet, urinal, hand basin, mirror, water heater, air-conditioning, kitchen cabinet, table, chair, wardrobe, TV, fridge, bed, mattress, smoke detector etc.

 

Characteristics of Modified Prefabricated living shipping container house :

1. Easy modification and decoration

2. Nice appearance: it can be designed according to your requirements.

3. Low cost and labor saving

4. Environment friendly

5. Flexible layout

Delivery time: 10 days after getting the deposit, not including the drawing confirmation.

Package: It can be delivered directly as the standard shipping container. The fittings inside will be fixed stably and strongly.

-----------------------------------------------------------------------------------------------------------
Container House,can be lifted and moved as ISO shipping container

1)       International standard size, GP20,GP40 and HP40. Container House

2)       High intensity with steel structure frame welded by steel.

3)       Sandwich panel with steel plate surface

4)       Good ability to assemble and disassemble for several times without damage.

5)       The waterproof system on the roof makes the house a good sealing effect.

6)       Cost saving and transportation convenient

7)       Service life can reach up to 15 years

-----------------------------------------------------------------------------------------------------------------------
Specifications1.The appearance is contracted
2.Strong and beautiful
3.Easy to install
4.Widely used around us

container house
1. general

The standard container for various purposes is suitable for international container transport. It is of appropriate external dimensions and has connections for lifting and fixing or compounding. The container is designed as a light construction consisting of floor  and roof frames and corner profiles. The construction enables compounding of individual containers in longitudinal and transverse directions without limits. It also enables compounding of containers in 2 floors in height (ground floor + first floor), or in 3 floors in height for warehousing of these containers (ground floor + 2 floor).

The wainscots of the container are made of light insulation panels and offer pleasant climate in the interior due to their building and physical properties.

Delivery: Containers can be delivered assembled or individually in kits 648 mm high.4 kits can be bundled in packages 2591 mm high (ISO dimensions)

 

2. demension (ISO Standard 1161)

-External length 20/(inner length) 20: 6.055m/(5.851m)

-External width/(inner width): 2.435m/(2.231m)

-External height/inner height: 2.790m/(2.510m).

-Tare: 1950 Kgs

 

3. steel frame

3.1 Material:         cold formed steel profiles in a thickness of 3 to 4mm (bottom rails).

3.2 Surface working: electric galvanization min 15 μm, zinc compatible epoxy ground coat in a thickness of 30μm , final zinc compatible vinyl acrylic coat in a thickness of 60-70μm.

3.3 Fittings:      8 comer fittings (dimensions according to ISO standard 1161), rainwater pipe in the roof framework, plate thickness of 10mm excluding top corner fittings of the top kit of each bundle (20mm thickness)

3.4 Forklift openings: openings for fork-lift pockets in the floor framework, dim 88×250mm in a distance of 1200mm

 

                             

4. floor
4.1 Composition:

-external wainscot: flat galvanized steel sheet metal in a thickness of 0.5mm.

-insulation filling: non combustible mineral wool in a thickness of 100 mm among steel transverse supports. Mineral wool density: 60 Kg/m3

-steam blockade: PE foil in a thickness of 80μm

- plywood panel in a thickness of 18mm

-glued PVC flooring covering in a thickness of 1.5mm.

4.2 Permitted loading : 2.50 KN/m2

4.3 Coefficient of thermal conductivity: l=0.039 W/mK

4.4 R value (Thermal Resistance) = 2.56 m2K/W

4.5 XPS insulation option: it is possible to choose an alternative insulation filling: extruded polystyrene (XPS) in a thickness of 80 mm among steel transverse supports.

XPS density :35 kgs/cubic meter

Coefficient of thermal conductivity: l=0.029 W/mK

R value (Thermal Resistance) = 2.76 m2K/W

 

5. ceiling

5.1 Composition:

-external wainscot: flat galvanized and painted steel sheet metal in a thickness of 0.5mm.

-insulation filling: non combustible mineral wool in a thickness of 100mm among plywood purlins. Mineral wool density: 60 Kg/m3

-steam blockade:  PE foil in a thickness of 80μm

-inner wainscot:  chip wood panel in a thickness of 9 mm with a foil in white color; joining of chip wood panels with PVC profiles

5.2 Meteor water outlet:   4 each of PVC rainwater pipes, diameter 50mm in corner pillars

5.3 Permitted loading:   1.50 KN/m2

5.4 Coefficient of thermal conductivity:  l=0.039 W/mK

5.5 R value (Thermal Resistance) = 2.56 m2K/W

 

6. facade wall

6.1 Side panels width: 550mm; total panel thickness: 70mm.

Five panels fit into the long side and two panels fit into the short

side of container and they are fully interchangeable

6.2 Composition:

-External wainscot: galvanized and painted steel sheet metal in a thickness of 0.5mm.

-Insulation filling: non combustible mineral wool in a thickness of 50mm in the wood framework. Mineral wool density: 60 Kg/m3

-Inner wainscot: chip wood panel in a thickness of 9 mm with a foil in wood pattern (bright oak or white).

 

Joining of panels with PVC profiles. Final elements in the interior are made of chip wood panel in a thickness 8mm with a foil in wood pattern.

6.3 Permitted loading:  1.00 KN/m2

6.4 Coefficient of thermal conductivity:  l=0.039 W/mK

6.5 R value (Thermal Resistance) = 1.28 m2K/W

6.6 100 mm insulation option: the framework can be modified so that mineral wool insulation reaches a thickness of 100mm. In this case R value (Thermal Resistance) goes up to: 2.56 m2K/W.

Note that 100 mm thick wall panels are not fully interchangeable like standard 50 mm ones.

 

7. doors
Standard external door. Single fold, 40mm thick, made of:

·                    a frame in prepainted aluminum

·                    hot galvanized and prepainted steel sheets (inside and outside)

·                    insulated with PL (polystyrene)

Opening dimensions of 808×2030mm, furnished with a handle lock with 3 keys.

Net opening dimensions: 754 x 1985 mm.

Also 845 x 2000 mm net opening is available.

 

8. windows
8.1 Windows

Option 1: made of PVC, white color, with dimensions 800×1100mm, glazed with double layer glass in a thickness of 4/15/4mm, with sliding mechanism (one side fixed and one sliding)

Option 2: made of PVC, white color, with dimensions 800×1100mm, glazed with double layer glass in a thickness of 4/15/4mm, with tilt and swing mechanism

Option 3: made of PVC, white color, with dimensions 800×1200mm, glazed with double layer glass in a thickness of 4/15/4mm, with tilt and swing mechanism

8.2 Rolling shutters

Option 1: external PVC rolling shutters in PVC guides.

Option 2: external Aluminum rolling shutters without insulation in Aluminum guides.

Option 3: external Aluminum rolling shutters with insulation in Aluminum guides.

 
9. electrical installation
9.1 Standard:  according to VDE 100 and CE regulations

9.2 Voltage:    220 V, 60 Hz single phase

9.3 Network connections:   CEE-connection plus/socket, 3-pole 32 A, 220V, mounted on the top frame in upper corners of a shorter side wall

9.4 Inner distribution system:  BVVB cables of suitable dimensions (6, 2.5, 1.5 mm) ,CE marked , flush-mounted.

All cables (located on the ceiling and inside wall panels) run into CE certified plastic conduits. Roof cables and panel cables are connected with CE compliant jacks. All jack connections are protected inside CE marked and IP44 rated distribution boxes.

9.5 Protection: protective current switch (40/2E-0,03A), automatic fuses (B-characteristics) of suitable power (10A, 16A)

9.6 Earthing:  galvanized connector with a steel plate of

dimensions 30x80mm welded on the bottom frame.