Automatic Full-Color Touch Screen Fiber Polishing Machine(HK-G55A)
Automatic Full-Color Touch Screen Fiber Polishing Machine(HK-G55A)
HK-G55A is specialized in manufacturing MT, MTP, MPO, MTRJ, E2000 etc conenctor. It is programmable, you can setting time, speed, polishing film, polishing fixture etc before you work.
HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is Low rotation speed start, pressure and speed to rise gradually, reduce fiber scratch, prevent ferrule fracture, and polishing quality stable core, lower noise. For more, Password Protection of system configuration, process configuration and Process transfer modules.
The operation is simple, reliable, consumables save, polishing cost be low. This HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine can be independent production or form a single assembly line production. Robust Design uses the highest-quality materials.
HK-G55A is applicable for the following materials and models:
Insert material: ZrO2(Zirconium dioxide)
Insert diameter: 2.5mm, 1.25mm, etc.
HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is used to grind insert products with different diameter, or different heads, such as
Plane, tapered plane, etc.
Below is the HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine function instruction:
1. Powerswitch
Control power supply of machine to switch on/off.
2. PLCHMI
Control speed, time, pressure, etc. Of machine.
3. Bottom disc
Allow revolution and rotation at the same time.
4. Center seat
Fix polishing jig.
5. Pressurepush rod
Apply pressure on polishing jig.
6. Rotating stand button
Control the installation of polishing jig.
7. Water storage
Clean polishing jig and rubber mat.
8. Suspension part
Adjust suspension height of optical fiber.
Automatic Full-Color Touch Screen Fiber Polishing Machine(HK-G55A)
HK-G55A is specialized in manufacturing MT, MTP, MPO, MTRJ, E2000 etc conenctor. It is programmable, you can setting time, speed, polishing film, polishing fixture etc before you work.
HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is Low rotation speed start, pressure and speed to rise gradually, reduce fiber scratch, prevent ferrule fracture, and polishing quality stable core, lower noise. For more, Password Protection of system configuration, process configuration and Process transfer modules.
The operation is simple, reliable, consumables save, polishing cost be low. This HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine can be independent production or form a single assembly line production. Robust Design uses the highest-quality materials.
HK-G55A is applicable for the following materials and models:
Insert material: ZrO2(Zirconium dioxide)
Insert diameter: 2.5mm, 1.25mm, etc.
HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is used to grind insert products with different diameter, or different heads, such as
Plane, tapered plane, etc.
Below is the HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine function instruction:
1. Powerswitch
Control power supply of machine to switch on/off.
2. PLCHMI
Control speed, time, pressure, etc. Of machine.
3. Bottom disc
Allow revolution and rotation at the same time.
4. Center seat
Fix polishing jig.
5. Pressurepush rod
Apply pressure on polishing jig.
6. Rotating stand button
Control the installation of polishing jig.
7. Water storage
Clean polishing jig and rubber mat.
8. Suspension part
Adjust suspension height of optical fiber.
| Pressure way | by air pressure | Insert Loss | 0.2 dB (SM) |
| 0.2 dB (MM) | |||
| polishing capacity(max) | SC, FC, ST: 12, 16, 20units LC: 16, 24units | Return Loss | 50 dB (PC) |
| 60 dB (APC) | |||
| polishing connector type | MTP, MPO, MTRJ, E2000, FC, SC, ST, LC, MU, and so on | Radius | 10~25mm |
| motor speeed | 2.5 Rotation: rpm Revolution: 0-400rpm | Offset | 50 μ M |
| dimension | 200*400*500mm | Under cut | 50nm |
| film size | 5' ' | Repeatability | 0.1dB |
| weight | 45KG | Interchangeability | 0.2 dB |
| Input voltage | 100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz | ||
| polishing cycle | 1.5mins | ||
| Polishing chassis diameter | 127mm | ||
| External diameter of bottom plate | 200mm | ||
| Inside diameter of bottom plate | 127mm | ||
| Polishing chassis beating | ≤ 5um | ||
| Polishing time setting | 0~999.99s | ||
| Counterweight pressure | -/+5g | ||
| Heavy punch | 500g or 250g | ||
| Stress arm | 5 phase shifter |