General Introduction:
It is used to work with various high-profile PVC, hot transfer and single veneer.
The products are of high quality, and will not peel off. The line and groove is clear.
The products are of high quality, and will not peel off. The line and groove is clear.
Features:
1. Hydraulic system is Taiwan PLC control, which is safe and reliable.
2. Electrical contacts and electrical systems components are imported. Its failure rate
is low.
3. Digitalized currency and voltage display, simple and clear. It uses computerized temperature controller so that the temperature is perfectly managed.
4. It has PVC anti-wrinkle function which improves success greatly. The success rate is more that 15%～20% than the average of the positive and negative membrane press
Technical Specifications:
|
Exterior size
|
6400*1900*2150(mm)
|
|
Working plate size
|
2300*1100*(mm)(inner size)
|
|
Maximum machining height
|
50(mm)
|
|
Rated operating pressure
|
Positive pressure≤0.4Mpa
Negative pressure≥-0.095Mpa
|
|
Total power
|
46.5KW
|
|
Actual power consumption
|
About 15KW
|
|
Total Weight
|
11T
|
|
Top temperature
|
150°C
|