metal roofing ridge forming machine
This machine is composed of automatic discharge table, feed leading table, main forming machine, cutting device, hydraulic station and computer control system.
Optional system are normal uncoiler and hydraulic uncoiler.
After roll formed by this machine,the surface will be smooth and beautiful without any scratch on surface.
312 ridge roll forming machine
1. Main counting parameters :
Appearance size: 8000mm*1000mm*1300mm
Width range: 312mm
Thickness range: 0.3-0.8mm
Inner diameter range: Φ500mm
Speed of product: 2-3m/min
2. Processes and components
Processes: Man-made uncoiler—Roll forming machine—PLC
system—Hydraulic system—mold pressing machine-Blade-Receiving table
3. Components of line:
|
No.
|
Name
|
Unit
|
Qty
|
|
1
|
Man-made uncoiler
|
set
|
1
|
|
2
|
Main machine for roll forming
|
set
|
1
|
|
3
|
Control system
|
set
|
1
|
|
4
|
Hydraulic system
|
set
|
1
|
|
5
|
mold pressing machine
|
set
|
1
|
|
6
|
Blade
|
set
|
1
|
|
7
|
Receiving table
|
set
|
1
|
4. Function and structure: Man-made uncoiler
Application and technical parameter :
Inner diameter:ø500mm
Outer diameter: ø 1100mm
Width:1000 mm
Loading weight:≤5 T
5. Main machine for roll forming
Application and technical parameter:
Pass:12 passes
Shaft diameter:ø65mm
Roller material:45 steel(Cr coating)
Total power:3 KW
6. Control system:
Function and operation:Control the starting,operation and stopping of the complete line,including distribution section,
operation table, counting instrument. Use PLC to control,set and adjust the length. Both man-made and auto operations:on the man-made condition,each equipment can operated by switch;on the auto condition,only circulating stop and rapid stop switch.
Function and operation:Control the starting,operation and stopping of the complete line,including distribution section,
operation table, counting instrument. Use PLC to control,set and adjust the length. Both man-made and auto operations:on the man-made condition,each equipment can operated by switch;on the auto condition,only circulating stop and rapid stop switch.
7. Hydraulic system
Function: apply power for cutting machine
8. Blade
Function and structure: cutting the forming sheet
Application and technical parameter:Blade material: Cr12 and Harding treatment
Max thickness: 0.3-0.8mm
9. Payment: 20%deposit, full payment before shipment.
10. Delivery: 30 days after getting deposit.
11. Guarantee:
In correct operation and maintenance, the machine is two years guarantee since leaving the seller’s factory.
12. Installation:
If buyer need, the seller will send one or two technician to the buyer’s factory to install & testing the machine, the buyer will assist the seller’s technician to get the visa and pay for the two-way flight tickets and local accommodation, visa cost. by the way , buyer pay 50USD/day for technician extra.
•Noted:all the parameters can be changed as the customer's requirement,and different machine.