Product Main

Specifications

Feature
Good mechanical properties, high tear strength, deformation and adaptable, puncture resistance, anti-aging, anti-ultraviolet-resistant,
Anti oil and salt, pH, anti-corrosion, high temperature-resistant, non-toxic, long service life. water, drainage, seepage, the good effect of moisture, width, thickness of the full range of specifications and low cost, simple construction.
 
Product Application
1) Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) .
2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.).
3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 
4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.). 
5), Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 
6), Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.) 
 
HDPE geomembrane technical index of ASTM test GM 13 standard
No.
Item
              Test Value
0.75mm
1.0 mm
1.25 mm
1.5 mm
2.0 mm
2.5 mm
3.0mm
1
Minimum Density(g/cm³)
0.939
2
 
Tensile Property
Strength at yield,N/mm
11
15
18
22
29
37
44
Strength at break ,N/mm
20
27
33
40
53
67
80
Elongation at yield,%
12
Elongation at break,%
700
3
Tear Resistance   N
93
125
156
187
249
311
374
4
Puncture Resistance  N
240
320
400
480
640
800
960
5
Stress Crack Resistance, hrs
300
 6
Carbon Black Content, %
2.0-3.0
Carbon Black Dispersion
1  or  2
 7
Standard OTI  Min
100
High Pressure OTI  Min
400
8
Impact Cold Crack at -70°C 
Pass
9
Water vapor permeability
 (g.cm/cm2 .s.Pa)
≤1.0×10-13
10
Dimensional Stability (%)
±2