The NT-MG1400 is a 5-Port 10/100/1000Mbps Web Smart Gigabit Ethernet Switch, utilizing a
compact form factor which can be mounted in a 10/19-inch rack with optional rack-mounting kits, or
placed on desktop. Compared with previous version, the enhanced software features as below:
?? 802.1Q VLAN
?? 802.1X Authentication / RADIUS
?? Rapid Spanning Tree
?? IGMP Snooping
?? SNMP monitor and SNMP Trap
Advantage:Cost-effective Desktop Size / High-Speed / Fiber Capability WEB Smart Switch
High Gigabit Performance / Wire-Speed Switching
PoE (POE+) Saves Your Power Infrastructure Cost
Friendly / Simple Web Management Interface
Remote and Centralize Management installation
Easy Cabling installation
Generic Features
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
1000Base-T, IEEE 802.3z 1000Base-SX/LX Ethernet standard
Complies with IEEE802.3 af(POE) or IEEE802.3 at(POE+) PSE standard
?? 4-Port 10/100/1000Mbps Gigabit Ethernet ports
?? 4-Port IEEE802.3 af(POE) or IEEE802.3 at(POE+) PSE ports
?? 4-Port PSE supply power line are PIN1,2(+) and PIN3,6(-)
?? 1 mini-GBIC/SFP slots
?? Each Switching port supports auto-negotiation-10/20, 100/200 and 1000/2000Mbps supported
?? Auto-MDI/MDI-X detection on each RJ-45 port supports CSMA/CD protocol
?? Prevents packet loss with back pressure (Half-Duplex) and 802.3x PAUSE frame flow control
(Full-Duplex)
?? 8K MAC address table, automatic source address learning and ageing
?? 16Gbps switch fabric, non-blocking switch architecture
?? 9K Jumbo Frame supports at all speed (10/100/1000Mbps)
?? 48 VDC PSE output voltage
?? Compatible with legacy pre-IEEE standard powered devices
?? Over-current protection and Under-current detection
?? Industry degree design and wide operating ranges (-20~70)
Management
?? Remote Web management interface
?? Firmware upgrade through Web interface
?? Cable Diagnostics technology
?? Supports SNMPv1 with RFC-1213/1573-Interface group and RMON Group 1 ( Statistics)
?? SNMP Trap
Specification
Product 5-Port 10/100/1000Mbps Web Smart Gigabit Switch
?? Model NT-MG1400-65W(130W)
?? Hardware Specification
?? Copper Ports 4 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
?? SFP/mini-GBIC Slots 1 SFP interfaces
?? Switch Architecture Store-and-Forward
?? Switch Fabric 10Gbps / non-blocking
?? Switch Throughput 11.9Mpps
?? Address Table 8K MAC address table with Auto learning function
?? Share Data Buffer 176K bytes on chip
?? Flow Control Back pressure for Half-Duplex
?? IEEE 802.3x Pause Frame for Full-Duplex
?? Jumbo Frame Up to 9K Bytes (Disable, 9K)
?? LED Power, 1000 Link/Act, 100/10 Link/Act per port
?? Dimensions 290mm x 145mm x 43.5mm (W x D x H)
?? Weight 1.8kg
?? Power Requirement 100 - 240VAC, 50 – 60Hz, Auto-sensing or 48-57VDC
?? Power Supply 65W for POE/130W for POE+
?? Temperature -20~70℃
?? Humidity Operating 5~95%(non-condensing)