High Quality Triple Standard Concertina Razor Wire Fence
Brand: DIAMOND
1. Galvanized steel wire and blade
2. ISO 9001 Standard and ISO 14001 Standard
Brand: DIAMOND
1. Galvanized steel wire and blade
2. ISO 9001 Standard and ISO 14001 Standard
3. O.D.: 900-1000mm
High Quality Triple Standard Concertina Razor Wire
Razor barbed wire shall be produced according to GBT standard or ASTM F 1379, ASTM F 1910.
Detailed specification of razor barbed wire:
Main strip( tape)
|
Strip (tape) thickness
|
0.5 (±0.05) mm
|
|
Strip (tape) width
|
15 (±2) mm
|
|
Strip (tape) material
|
galvanized steel strip
|
|
Strip (tape) tensile strength
|
270-500 N/mm2
|
Reinforcing core wire
|
Wire dia.
|
2.5 (±0.1) mm
|
|
Wire material
|
High tensile heavily hot dip galvanized
|
|
Wire tensile strength, minimum
|
1350 -1500 N/mm2
|
Concertina (razor) clips
|
Clips thickness
|
1,4 mm
|
|
Material
|
Hot galvanized
|
The detailed steps for building the triple standard concertina fence are the belowed:
1. First lay out and install pickets from left to right (facing the enemy). Put the long pickets five paces apart, and the short (anchor) pickets two paces from the end of the long pickets. The enemy and friendly picket rows are offset and are placed 3 feet apart.
2. Now lay out all rolls of concertina. Place a roll in front of the third picket on the enemy side, and two rolls to the rear of the third picket on the friendly side. Repeat this step for every fourth picket thereafter. 3. Install the front row concertina and horizontal wire. Place the concertina over the pickets.
4. Install the rear row of concertina and horizontal wire.
5. Install the top row of concertina and join the rear horizontal wire.
If you have requirement of Triple Standard Concertina razro wire, welcome come to DIAMOND COMPANY