Technical specification for single column vertical lathe C5112/CX5112
I. Main use
The series machine is suitable of the ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools. It can perform finely and roughly turning cylinder and inner hole, inner and outer taper, surface, and grooving.
II．Main technical specification
|
Name
|
Value
|
|
Max turning diameter (mm)
|
1250
|
|
Max. working height of Standard model
Max. working height of increasing to 200mm
|
1000
1200
|
|
Max. weight of workpiece (t)
|
4
|
|
Table diameter (mm)
|
1000
|
|
Speed range of table (r/min)
|
6.3~200
|
|
Speed-step of table
|
16
|
|
Max torque of table (KN·m)
|
17.5
|
|
Max cutting resistance of railhead (KN)
|
20
|
|
Max cutting resistance of sidehead (KN)
|
20
|
|
Total cutting resistance (KN)
|
35
|
|
Travel of railhead ( Horizontal) (mm)
|
700
|
|
Travel of railhead (Vertical) (mm)
|
Turrte:650 Ram:800
|
|
Travel of sidehead ( Horizontal) (mm)
|
630
|
|
Travel of sidehead (Vertical) (mm)
|
900
|
|
Travel of crossbeam (mm)
|
650/850
|
|
Moving degrees limit of railhead (°)
|
±30
|
|
Feed range of railhead/sidehead (mm/min)
|
0.8~86
|
|
Rapid traveling speed of railhead/sidehead (mm/min)
|
1800
|
|
Traveling speed of crossbeam (mm/min)
|
440
|
|
Power of main motor (kw)
|
22
|
|
Overall dimensions (L×W×H) (mm) Standard model
Increasing 200mm
|
2360×2270×2800
2360×2270×3000
|
|
Weight of machine(about t)
|
9
|