Technical specification for double column vertical lathe C5225/CX5225
I. Main use
The series machine is suitable of the ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools. It can perform finely and roughly turning cylinder and inner hole, inner and outer taper, surface, and grooving.
II. Main technical specification
|
Name
|
Value
|
|
Max. turning diameter (mm)
|
2500
|
|
Max. working height (mm)
|
1600/2000/2500
|
|
Max. weight of workpiece (t)
|
10
|
|
Table diameter (mm)
|
2250
|
|
Speed range of table (r/min)
|
2~63
|
|
Speed-step of table
|
16
|
|
Max. torque of table (KN.m)
|
56
|
|
Max. cutting resistance of right tool post(KN)
|
35
|
|
Max. cutting resistance of left tool post (KN)
|
28
|
|
Travel of right tool post (Horizontal) (mm)
|
-20~1400
|
|
Travel of right tool post (Vertical) (mm)
|
1000/1300
|
|
Travel of left tool post (Horizontal) (mm)
|
-20~1400
|
|
Travel of left tool post (Vertical) (T-Ram) (mm)
|
1000/1300
|
|
Feed range and speed-step of tool post (mm/min)
|
0.24~145 18 steps
|
|
Fast moving speed of tool post (mm/min)
|
1550
|
|
Crossbeam fluctuation travel (mm)
|
1300/1700/2200
|
|
Crossbeam fluctuation speed (mm/min)
|
350
|
|
Moving degrees limit of tool post (°)
|
±30
|
|
Cutting section of tool bar (mm)
|
40×50
|
|
Crossbeam fluctuation motor power (AC) (KW)
|
7.5
|
|
Cutting feed two-speed motor power of left feeding-box (AC) (KW)
|
1.3/1.8
|
|
Fast motor power (KW)
|
2.2
|
|
Power of main motor (AC) (KW)
|
55
|
|
Weight of machine (t)
|
32/38
|