12V Micro Brushless DC Submersible Pump, Low Noise, Power-saving, For Water Circulation / Pumping / Cooling Sys.
Power Supply: Can be Battery, PV Panel, DC Source Adapter, etc
Structure: Single-stage Pump
Pressure: Low Pressure
Usage: Water, Oil, alcohol or other fluids circulation / pumping / cooling sys.
Theory: Centrifugal Pump
Model Number: ZC-A40 (12V)
Color: Black
Size: 9.2cmx5cmx7.2cm
Weight: 220g
Voltage Range: 5V-12Vdc (12Vdc advised)
Waterproof Class: IP68 (Fit for submersible installation)
Application: Amphibious, can be Submersible Installed
No-load Rated Current: 0.65A or less
Max Current: 1.05A
Max Head: 3.8m
Max Flow Rate: 550LPH
Typical Features:
Pump material can be corrosion-resistant and eco-friendly
Brushless, permanent magnetic rotor, maintenance-free, long life
Small size, high efficiency, low power consumption, low noise
Stator and circuit board sealed by epoxy resin, completely water proof
Can be fixed on the vessel wall with sucking disk
Pump products can be customized for bulk product demands
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump
2. Make sure the dimension(threaded interface or not, the direction and diameter of outlet and inlet).
3. Working environment(temperature and medium).
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Note:
1. Working at rated voltage . The positive pole is red wire, the negative pole is black wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation.(if outside water installation, you should make sure it is installed blow the liquid surface)
3. When blocking, long time runningis not allowed.
4. Preventing any hard particles entering the pumps.