12V Brushless DC Pump ZC-B40 12V, High Temp. 95C, Fit for Hot Water/ Oil Pumping / Circulation
Is_customized: Yes for bulk demands
Power Supply: Can be Battery, PV Panel, DC Source Adapter, etc
Structure: Single-stage Pump
Pressure: Low Pressure
Usage: Water, Oil, alcohol or other fluids circulation / pumping / cooling sys.
Theory: Centrifugal Pump
Model Number: ZC-B40 (12V)
Color: Black
Size: 9.2cmx5cmx7.2cm
Dimension of Inlet and Outlet: 9.5mm / 9.5mm
Weight: 220g
Voltage Range: 5V-12Vdc (12Vdc advised)
Waterproof Class: IP68 (Fit for submersible installation)
Application: Amphibious, can be Submersible Installed
Max Current: 1.05A
Max Head: 4.5m
Max Flow Rate: 350LPH
Noise: <35dB, within 05m
Working Temp. Rang: 0C-95C, for hgh temp. fluid circulaton / pumping
Power Supply: Can be Battery, PV Panel, DC Source Adapter, etc
Structure: Single-stage Pump
Pressure: Low Pressure
Usage: Water, Oil, alcohol or other fluids circulation / pumping / cooling sys.
Theory: Centrifugal Pump
Model Number: ZC-B40 (12V)
Color: Black
Size: 9.2cmx5cmx7.2cm
Dimension of Inlet and Outlet: 9.5mm / 9.5mm
Weight: 220g
Voltage Range: 5V-12Vdc (12Vdc advised)
Waterproof Class: IP68 (Fit for submersible installation)
Application: Amphibious, can be Submersible Installed
Max Current: 1.05A
Max Head: 4.5m
Max Flow Rate: 350LPH
Noise: <35dB, within 05m
Working Temp. Rang: 0C-95C, for hgh temp. fluid circulaton / pumping
Typical Features:
No electric spark, no danger of current leakage
Withstand high temperature 95C
Pump material can be corrosion-resistant and eco-friendly
Brushless, permanent magnetic rotor, maintenance-free, long life
Small size, high efficiency, low power consumption, low noise
Stator and circuit board sealed by epoxy resin, completely water proof
Can be fixed on the vessel wall with sucking disk
Pump products can be customized for bulk product demands
No electric spark, no danger of current leakage
Withstand high temperature 95C
Pump material can be corrosion-resistant and eco-friendly
Brushless, permanent magnetic rotor, maintenance-free, long life
Small size, high efficiency, low power consumption, low noise
Stator and circuit board sealed by epoxy resin, completely water proof
Can be fixed on the vessel wall with sucking disk
Pump products can be customized for bulk product demands
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump
2. Make sure the dimension(threaded interface or not, the direction and diameter of outlet and inlet).
3. Working environment(temperature and medium).
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Note:
1. Working at rated voltage (DC12V/1A ). The positive pole is red wire, the negative pole is black wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation.(if outside water installation, you should make sure it is installed blow the liquid surface)
3. When blocking, long time runningis not allowed.
4. Preventing any hard particles entering the pumps.
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump
2. Make sure the dimension(threaded interface or not, the direction and diameter of outlet and inlet).
3. Working environment(temperature and medium).
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Note:
1. Working at rated voltage (DC12V/1A ). The positive pole is red wire, the negative pole is black wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation.(if outside water installation, you should make sure it is installed blow the liquid surface)
3. When blocking, long time runningis not allowed.
4. Preventing any hard particles entering the pumps.