Specifications
2.6 Low Heat Dispersal
Use of this fuel provide a more focused heat source with less heat loss, maintaining a more comfortable, safer, lower fatigue working environment.
1) Patented Integration of Water Electrolysis Cell Forming
Our electrolysis cell Integration is used in Large Module in order to make sure No Leakage, Explosion-proof, and Long Life Cycle.
2) Patented Electrolysis Power Supply based SCM
Our Power Supply of welder generator is specially designed for Electrolysis.
For example:
2.1 Constant current control by temperature feedback control
2.2 Current adjust by user to meet the constant flux of oxy-hydrogen gas
2.3 Efficient energy conversion(AC TO DC) based IGBT
2.4 Special cooling design for working 24 hours continues.
3) Patented Multi-layer ANTI-FIRE Water Seal Technology
Water Seal Device is important unit of welder generator, this unit is designed for backfire-proof, It works 100% OK.
4) Automatic Water Level Detection Technology
We design by ourselves, it used for detect the water level of the electrolysis cell and water -deposit tank. When water is too low, the alert lamp is light. When water is lowest, the power supply switches off to proof the welder generator.
5) Water Automatic Replenishment Technology
When water of the electrolysis cell is too low, the system will auto pump water from water-deposit tank.
6) High-efficiency Gas Water Separator Technology
This Technology is used to separate the water from gas in order to ensure the gas is pure. If the oxyhydrogen gas has some water even little, the temperature of the oxyhydrogen flame will become lower.
7) Electrolyte-Automatic Cycle Technology
- Place of Origin: Hunan, China (Mainland)
- Brand Name: Okay Energy
- Model Number: OH100,200,300,400,1500,3000,5500,7500,10000
- brand: okay energy
- AC: 220V/110V
- DC: 5V/60A
- color: blue/black
- gas output: 100L/h-10000L/h
- water feed: manual/auto
- flame feed: manual/auto
- material: metal
- customized: yes
1.What is welder generator?
welder generator is able to separate clean soft water (H2O) into hydrogen and oxygen gases, using a small amount of electric power through a special process. These gases are then mixed and delivered for use in a wide variety of applications, such as heating, brazing, cutting, etc. which currently use LPG or other gas for fuel. When burned, this fuel generates no green house gases or pollutants,and burns at virtually 100% efficiency. This welder generator certainly has the potential for becoming the most significant advancement in fuel for the 21st century.
2. Why I used welder generator?
2.1 Maximum Safety
a. Steady, reliable fuel delivery. Fuel is available immediately after machine is switched on. No volatile fuel tanks which can rupture or explode.
b. Multiple safety devices, including overheating and in-sufficient water cut-off switches, will automatically turn off power to ensure the safety of both our welder generator and user.
a. Steady, reliable fuel delivery. Fuel is available immediately after machine is switched on. No volatile fuel tanks which can rupture or explode.
b. Multiple safety devices, including overheating and in-sufficient water cut-off switches, will automatically turn off power to ensure the safety of both our welder generator and user.
2.2 Environmentally Friendly
a. The Fuel generated by our welder generator burns completely without creating pollutants, toxic fumes, or public nuisance.
b. Our welder generator does not generate hydrocarbons, carbon monoxide, or carbon dioxide.
a. The Fuel generated by our welder generator burns completely without creating pollutants, toxic fumes, or public nuisance.
b. Our welder generator does not generate hydrocarbons, carbon monoxide, or carbon dioxide.
2.3 High Mobility
a. Our welder generator comes equipped with wheels to facilitate moving the generators to the job, not the other way around.
b. Our welder generator immediately generates fuel as needed, eliminating the need for dangerous awkward gas tanks.
c. Fuel can be used for long periods of time without overheating peripheral equipment
a. Our welder generator comes equipped with wheels to facilitate moving the generators to the job, not the other way around.
b. Our welder generator immediately generates fuel as needed, eliminating the need for dangerous awkward gas tanks.
c. Fuel can be used for long periods of time without overheating peripheral equipment
2.4 High Temperature & Calorific value
a. Calorific value of welder generator is 34000Kcal/kg
b.The flame temperature of welder generator is over 2800°,it can melt refractory metals and none-metals
2.5 Low Cost & Maximum Economy
a. Fuel is generated by our welder generator using only electricity and clean soft water.
b. Both economical and practical when compared to the currently used LPG, Propane, or acetylene.
a. Fuel is generated by our welder generator using only electricity and clean soft water.
b. Both economical and practical when compared to the currently used LPG, Propane, or acetylene.
2.6 Low Heat Dispersal
Use of this fuel provide a more focused heat source with less heat loss, maintaining a more comfortable, safer, lower fatigue working environment.
4. Okay Energy Welder Generator Technical Parameters:
| Model Number | OH100 | OH200 | OH300 | OH400 |
| AC Voltage Requirement (V) | 220/110 | 220/110 | 220/110 | 220/110 |
| Phase | single | single | single | single |
| DC Voltage &Current (A) | 5V 60A | 5V 60A | 5V 60A | 5V 60A |
| Max Gas Output | 100L/h | 200L/h | 300L/h | 400L/h |
| Max. Working Pressure (kg/cm2) | 1.3 | 1.3 | 1.3 | 1.3 |
| Max. Water Consumption (L/h) | 0.06 | 0.11 | 0.17 | 0.23 |
| Water Feed | manual | manual | manual | manual |
| Max. Flame Modifier Consumption (L/h) | 0.05 | 0.1 | 0.15 | 0.17 |
| Flame Modifier Feed | manual | manual | manual | manual |
| Dimensions - L*W*H (mm) | 480*280*360 | 620*280*360 | 780*280*520 | 950*380*520 |
| Gross Weight (kg) | 12 | 33 | 38 | 45 |
| Ventilation Space Requirement (mm) | 200 in each direction | 200 in each direction | 200 in each direction | 200 in each direction |
| Model Number | OH1500 | OH3000 | OH5500 | OH7500 | OH10000 |
| AC Voltage Requirement (V) | 380 | 380 | 380 | 380 | 380 |
| Phase | three phase | three phase | three phase | three phase | three phase |
| Power Consumption (kW/h) | 4.5 | 9 | 17 | 23 | 31 |
| Max Gas Output (L/h) | 1500 | 2700 | 5000 | 7200 | 10000 |
| Max. Working Pressure (kg/cm2) | 1.9 | 1.9 | 1.9 | 1.9 | 1.9 |
| Max. Water Consumption (L/h) | 0.9 | 1.8 | 2.8 | 4 | 5.6 |
| Water Feed | auto | auto | auto | auto | auto |
| Dimensions - L*W*H (mm) | 1200*800*1200 | 1300*800*1300 | 1500*800*1450 | 1650*800*1500 | 1520*900*1490 |
| Gross Weight (kg) | 280 | 330 | 396 | 552 | 610 |
| Ventilation Space Requirement (mm) | 400 in each direction | 400 in each direction | 400 in each direction | 400 in each direction | 400 in each direction |
5. About Okay Energy Technology
Okay Energy Co., Ltd specializes in research, manufacturing oxyhydrogen generator( also named welder generator),
Okay Energy Co., Ltd specializes in research, manufacturing oxyhydrogen generator( also named welder generator),
owned many patents.
1) Patented Integration of Water Electrolysis Cell Forming
Our electrolysis cell Integration is used in Large Module in order to make sure No Leakage, Explosion-proof, and Long Life Cycle.
2) Patented Electrolysis Power Supply based SCM
Our Power Supply of welder generator is specially designed for Electrolysis.
For example:
2.1 Constant current control by temperature feedback control
2.2 Current adjust by user to meet the constant flux of oxy-hydrogen gas
2.3 Efficient energy conversion(AC TO DC) based IGBT
2.4 Special cooling design for working 24 hours continues.
3) Patented Multi-layer ANTI-FIRE Water Seal Technology
Water Seal Device is important unit of welder generator, this unit is designed for backfire-proof, It works 100% OK.
4) Automatic Water Level Detection Technology
We design by ourselves, it used for detect the water level of the electrolysis cell and water -deposit tank. When water is too low, the alert lamp is light. When water is lowest, the power supply switches off to proof the welder generator.
5) Water Automatic Replenishment Technology
When water of the electrolysis cell is too low, the system will auto pump water from water-deposit tank.
6) High-efficiency Gas Water Separator Technology
This Technology is used to separate the water from gas in order to ensure the gas is pure. If the oxyhydrogen gas has some water even little, the temperature of the oxyhydrogen flame will become lower.
7) Electrolyte-Automatic Cycle Technology
We used static way to realize Electrolyte Cycle, don't use pump because the pump is a mechanic unit that is easily damaged.