2012 Hot Sales Alluvial gold washing plant
1. 20 years experience
2. Easy installation
3. ISO9001:2008
4. Great with placer gold
2. Easy installation
3. ISO9001:2008
4. Great with placer gold
2012 Hot Sales Alluvial gold washing plant
Adopting foreign technology, GTX Series ore washing machines have single layer or double layers circular sieve to classify two to three kind different grades sand and stone which should be clearly de-slimed. It is mainly used for washing ore before beneficiation operation system, and improving the ore grade for next processing step. It can be used for manganese ore, iron ore, limestone, tungsten, and silica ore, and etc.
Gold ore washing machine rotary scrubber, the slurry material feeds into the drum where it is vigorously scrubbed, the soil matrix is broken up and the target mineral is released. The material is then screened through the rotating screen and waste is ejected. The screened material is then passed on to the concentrating modules for upgrading.
2012 Hot Sales Alluvial gold washing plant features
Designed to break up alluvial gravels, clays and sand
- High capacity and high power scrubbing
- The long drum of the scrubber retains material for longer, more vigorous washing for complete separation
- One high output electrical motor driving a gear system providing efficient torque
- Adjustable rotary speed
- The water with high pressure flushed the inwall of drum
- Can accept material up to 230mm
- Mechanical sealing of inlet chute – minimal spillage when over feeding
- Drive loads absorbed within the drive frame and pivoting drive frame design – Foundations only have to support vertical load and are not critical for alignment ie minimal cost
- Shell design less mass than conventional roller supported units – installation craneage requirement reduced
Descriptions
The rotary scrubber is an autogenous rotating drum scrubber, utilising pebbles and rocks within the feed source to fracture and disintegrate clays, agglomerates and soft oxides. Disintegrated material is homogeneously slurried within the drum, whilst the autogenous load is retained within the drum by reverse flights located at the drum discharge end. Slurry and washed oversize overflows the drum discharge throat to the concentric exit trommels.
The scrubber spins slowly, similar to a giant washing machine. It churns the fines and oversize and water together, vigorously breaking up the soil matrix as well as liberating the target mineral from tough clay, schist’s and rock.
The scrubber spins slowly, similar to a giant washing machine. It churns the fines and oversize and water together, vigorously breaking up the soil matrix as well as liberating the target mineral from tough clay, schist’s and rock.
After the fine (soil) is separated, the material is moved into the screen. The rotating screen separates the oversize material from the fines (the fines are usually termed or categorized into less than 8mm). Most of the freely (gravity) recoverable gold and or other recoverable mineral is contained in the – 8mm fines
This material is then passed on to the downstream process equipment which can be in various forms such as centrifugal Concentrator, spirals, jigs etc.
Technical Data:
|
Model
|
Drum Dimension(mm)
|
Screen Size(mm)
|
Rotate Speed(r/min)
|
Feeding Size(mm)
|
Water Consumption(m3/h)
|
Capacity(t/h)
|
Power(kw)
|
Weight(t)
|
|
GTX1030
|
Φ1000×3000
|
≤20
|
27.9
|
≤80
|
1
|
40
|
15
|
3.8
|
|
GTX1230
|
Φ1200×3000
|
≤25
|
27.6
|
≤100
|
1.3
|
70
|
22
|
4.7
|
|
GTX1430
|
Φ1400×3000
|
≤25
|
27.6
|
≤100
|
1.5
|
80
|
22
|
4.9
|
|
GTX1545
|
Φ1500×4500
|
≤25
|
21
|
≤160
|
1.7
|
120
|
30
|
6.9
|
|
GTX2265
|
Φ2200×6500
|
≤50
|
19
|
≤230
|
1.8
|
180
|
37
|
15.9
|
Payment terms:
1. We usually accept T/T, L/C;
2. T/T: 30% in advance as down payment, the balance before delivery;
3. We take pictures of finished products before delivery.
Ways of Packing:
1.Sand blasting, coat with high quality paint;
2.Product wrap by PP-Bubble
3.Load container, Spear Parts in wooden case.
Transportation:
1. By sea Freight;
2. MSK/MSC/APL/EMC/WANHAI/KLINE
3. We will remind you before boat arrival
Our Service:
1) Pre-sale Service:
Design the suitable products and offer the reasonable consultation to meet your need by our engineer.
We can also offer experiment to test the equipment that the customer need.
2) After-sale Service:
On the spot guidance for installation by our engineers, and the buyer is responsible for the expense.
We have a perfect after-sales service system and team with professional and for whole using life.
Our price are most competitive and reasonable, all order will be supplied within the stipulated period.
Thank you for your interest in Gongyi Hengchang Metallurgy Building Material Equipments Plant.
We look forward to new and old customers come to visit,
study, trade negotiations, and we would like to cooperate and develop with you hand in hand.
Please feel free to use any of the methods to get in touch with us.