Heatsink: Screw-shape aluminum housing is good for heat dissipation
Lens: integrated lens, viewing angle: 38°, 45°, 60°are available.
Light Source: CREE or other LEDs.
Driver: High efficient driver, input voltage AC100-240V, CE, FCC certification.
Dimmable: External isolated dimmable driver, most Triac dimmers available, stable dimming, no flickering, no high-frequency noise, dimming range 1%-100%. Warranty: Two years
Certification: CE, FCC,C-TICK, etc.
Lens: integrated lens, viewing angle: 38°, 45°, 60°are available.
Light Source: CREE or other LEDs.
Driver: High efficient driver, input voltage AC100-240V, CE, FCC certification.
Dimmable: External isolated dimmable driver, most Triac dimmers available, stable dimming, no flickering, no high-frequency noise, dimming range 1%-100%. Warranty: Two years
Certification: CE, FCC,C-TICK, etc.
| Electric Parameters | ||||||||
| E27 1*3W/3*1W | GU10 1*3W/3*1W | GU10 3*2W | ||||||
| Input | Rated Value | Rated Value | Rated Value | |||||
| Voltage | V_in | AC100-240 | AC100-240V | AC100-240V | ||||
| Frequency | f_in | 50HZ | 50HZ | 50HZ | ||||
| Power | Pin | 3.9W | 3.9W | 5.2W | ||||
| CRI | Luminous Flux(LM) | Power(W) | 1M Illumination(LUX) | Light Intensity (CD) | ||||
| E27 1*3W | RA≥70 | 140±10% | 3.9±0.3 | 250±10% | 220±10% | |||
| E27 3*1W | RA≥70 | 230±10% | 3.9±0.3 | 560±10% | 520±10% | |||
| GU10 1*3W | RA≥70 | 140±10% | 3.9±0.3 | 250±10% | 220±10% | |||
| GU10 3*1W | RA≥70 | 230±10% | 3.9±0.3 | 560±10% | 520±10% | |||
| GU10 3*2W | RA≥70 | 280±10% | 5.2±0.3 | 650±10% | 600±10% | |||
| Products | Net weight(g) | Gross weight(g) | Capsule | Neutral box(cm) | Inner box (cm) | Carton(cm) | Quantity/Carton | |
| E27 1*3W | 50 | 70 | √ | 5.2*5.2*6.4 | 27*12*14.5 | 59*28*16.5 | 100 | |
| E27 3*1W | 53 | 73 | √ | 5.2*5.2*6.4 | 27*12*14.5 | 59*28*16.5 | 100 | |
| GU10 1*3W | 48 | 68 | √ | 5.2*5.2*6.4 | 27*12*14.5 | 59*28*16.5 | 100 | |
| GU10 3*1W | 50 | 70 | √ | 5.2*5.2*6.4 | 27*12*14.5 | 59*28*16.5 | 100 | |
| GU10 3*2W | 45 | 65 | √ | 12*6*6.5 | / | 47.5*35*32 | 100 | |
Direction for operation :
1. Confirm the rated voltage before the installation to keep the porduct from being damaged
2. Cut off the power until the installation is finished
3. Contact us when any problems happenNever open the product without permition.
4. Basic electronic knowledge or professinal indication is needed for operator
5. The typical tempreture for product is -20℃-45℃,bad environment decrease the lifetime of the products
6. Never use the prodcut in a humid environment
Typical application:
The Products are widely used in indoor lighting,such as counter lighting,advertisement lighting.