PYB/Z/D Spring Cone Crusher
Spring cone crusher application
Spring cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, Spring cone crushers designed by SBM with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Spring cone crusher main parts
spring cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
We also offer spare parts and original wear parts related to the spring cone crusher.
Spring cone crusher working principle
Cone crushers crushe materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Spring Cone Crusher Main Technical Parameters:
Spring cone crusher application
Spring cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, Spring cone crushers designed by SBM with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Spring cone crusher main parts
spring cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
We also offer spare parts and original wear parts related to the spring cone crusher.
Spring cone crusher working principle
Cone crushers crushe materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Spring Cone Crusher Main Technical Parameters:
|
Model |
Diameter of Bottom End of Conical Crushing Head (mm)
|
Max. Feed Size (mm)
|
Adjustable Range of Discharge Opening (mm)
|
Crushing Capacity (t/h)
|
Motor Power (Kw)
|
Rev. of Eccentric Shaft
|
Weight (t)
|
Overall Dimension (L×W×H) (mm)
|
|
PYB600
|
600
|
75
|
12-25
|
40
|
30
|
356
|
5
|
2234×1370×1675
|
|
PYZ600
|
600
|
35
|
3-13
|
5-23
|
30
|
356
|
5.3
|
2234×1370×1675
|
|
PYB900
|
900
|
115
|
15-50
|
50-90
|
55
|
333
|
11.2
|
2692×1640×2350
|
|
PYZ900
|
900
|
60
|
5-20
|
20-65
|
55
|
333
|
11.2
|
2692×1640×2350
|
|
PYD900
|
900
|
50
|
3-13
|
15-50
|
55
|
333
|
11.3
|
2692×1640×2350
|
|
PYB1200
|
1200
|
145
|
20-50
|
110-168
|
110
|
300
|
24.7
|
2790×1878×2844
|
|
PYZ1200
|
1200
|
100
|
8-25
|
42-135
|
110
|
300
|
25
|
2790×1878×2844
|
|
PYD1200
|
1200
|
50
|
3-15
|
18-105
|
110
|
300
|
25.3
|
2790×1878×2844
|
|
PYB1750
|
1750
|
215
|
25-50
|
280-480
|
160
|
245
|
50.3
|
3910×2894×3809
|
|
PYZ1750
|
1750
|
185
|
10-30
|
115-320
|
160
|
245
|
50.3
|
3910×2894×3809
|
|
PYD1750
|
1750
|
85
|
5-13
|
75-230
|
160
|
245
|
50.2
|
3910×2894×3809
|
|
PYB2200
|
2200
|
300
|
30-60
|
490-750
|
260-280
|
220
|
80
|
4622×3302×4470
|
|
PYZ2200
|
2200
|
230
|
10-30
|
200-580
|
260-280
|
220
|
80
|
4622×3302×4470
|
|
PYD2200
|
2200
|
100
|
5-15
|
120-340
|
260-280
|
220
|
81.4
|
4622×3302×4470
|