(i) HARDNESS: When tested in accordance with IS 1500/1983 the hardness at any point across the section of the ball is more than 375 BHN.
(ii) MICROSTRUCTURE: Microstructure shall be free from continuous carbide network.
(iii) HEAT TREATMENT: The grinding media is suitably heat treated to obtain the required hardness and Microstructure.
(iv) STANDARD SIZE OF GRINDING MEDIA: Balls diameter (mm)100,90,80,75,70,65,60,50,40,30,25, & 20
Cylpebs (mm)-25x25, 22x22, 19x19
(v) TOLERANCE ON SIZE: Variation on size shall not exceed the following limits:-
SHAPE AND SIZE
|
TOLERANCE (mm)
|
(1) Balls for sizes 60 mm & above
|
+/- 2.50
|
(2) Balls for sizes 30 to 50 mm & below
|
+/- 2.00
|
(2) Balls for sizes 15 to 25 mm & below
|
+/- 1.50
|
(3)Cylpebs for all sizes
|
+/- 1.50
|