Product Main

Specifications

Computer cable

The product rated voltage 500 V and the following for the interference of the high sex requirement electronic computer [1] and automation connectivity with cable. Cable wire core insulation is with antioxidant properties of the type K class B low density polyethylene. Polyethylene high insulation resistance, good withstand voltage, dielectric coefficient little and medium loss temperature and frequency variation of the influence of the small, not only can meet the requirements of the transmission performance, and can ensure the service life of the cable.
In order to reduce the loop of mutual crosstalk and external disturbance, the cable shielding structure. Cable shielding requirements according to different situations is were used to wring combination: insulation, and the composition of the cable to wring total shielding, to wring combination shielding total shielding and other methods after.
Shielding materials have round copper wire, copper strip, aluminum take/plastic composite with three. Shielding and shielding of to have good insulation and cable in use if to shield between appear to shield potentials, will not affect signal transmission quality.
 
Technology parameters:
 
Product rated voltage (U0 / U) : 300/500 V
Working temperature of 70 °C for a long time
When laying temperature not less than 40 °C, fixed installation, the fixed installation-15 °C
Smallest bending radius: no armoured layer should be less than 6 times of cable diameter, tape armored layer of cable should be no less than 12 times of cable diameter
In 20 °C in the dc 500 V voltage stability test charging 1 min after insulation resistance should be not less than 2500 M Ω · Km
The feasitility of ground between and shielding screen and total shielding should constantly road between
Cable wire core and wire core and between shielding should undergo between 50 HZ ac ac 2000 V voltage test, 5 min not breakdown