Product Main

Specifications

Speed adjustable 12V 3-Phase Brushless DC Pump High tempcorrosion proof
Low noise For hot water pumping circulation Fountain

 
Two Different Way of Regulation: Potentiometer or External Changing 0-5V Analog Signal; PWM Mode needs to be customized.
Max Head 8m, Max Flow Rate 1000L/H
3phase brushless design, No Brush Friction No spark, Absolute safety
Long Life Span, More than 30,000hrs
Withstand high temp. as 100 degrees Withstand high temp. as 100 degrees Celsius
Fit for continuously pumping hot water or other fluids
Low Noise, Completely Water Proof
 
 
Features:
 
3Phase brushless, permanent magnetic rotor, maintenance-free, long lifeCan stand high temperature 100 degrees Celsuis, continuously pumping boiling waterLocked-rotor and reverse connection circuit protection, automatic overload protectionSoft-start with low in-rush current, suitable for direct solar panel connectionSmall size, high efficiency, low consumption, low noiseStator and circuit board sealed by epoxy resin, completely water proofSleeve and shaft with carbon fiber materials, better performance than ceramic and metal materialsParameter adjustable, 12v pump’s Max head can be adjusted from 2m to 8m
 
 
 
 
 
 
Specifications:
Sizes and weight:98mmx89mmx61mm; 600g
Dimension of Inlet and Outlet: 20mm O.D., 1/2 thread
Power Saving: 43W
Low Noise: Less than 40dB
Wide Working Voltage Range: 5-12Vdc (12Vdc rated)
Max Static Head: 8m (26ft)
Max Flow Rate: 17L/Min (4.5G/Min)
Fluids: Water, oil, gasoline, acid and alkali solution, etc
Power Supply: can be battery, DC electric source or solar panel, etc
Super Long Life: >3years, can be continuously working, without maintenance
Water Proof Class: IP68 (Fit for submersible installation)
 
 
 
 
This pump has a wide range of applications, motorcycle cooling and other vehicle cooling, landscaping and garden pumping, PC cooling system, humidifier, medical device,such as car cooling,and many other cooling and circulation system
 
Note:

1. Working at rated voltage. The positive pole is brown wire, the negative pole is blue wire.

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation.(if outside water installation, you should make sure it is installed blow the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.