Innovative HD Smartbox HDMI Splitter Switch All in One Supports CEC bypass
Introduction:
This innovative HD Smartbox offers a simple solution to replace all HDMI splitters and switches you are using. It can distribute HDMI signal bi-directionaly as each interface on the unit combines input and output function. You only need to run one HDMI cable instead of two as other devices for installation, the input and output signal can pass through bi-directionally through this cable without any signal loss. This enables you a clean and tidy set up with less money!
The HD Smartbox is ideal for multi room applications such as home theater, conference room presentation, school and corporate training environments etc.
Features:
1. HDMI, HDC 2.0 and DVI compliant
2. Support full 3D pass-through
3. Support high resolution up to 1080P
4. Super IR control system
5. Support CEC bypass
6. External and internal EDID settings
Specification:
Resolution: 480i~1080P@50/60,1080P@24/50/60, VGA~UXGA
Storage Temperature Humidity: 5 ~ 90% Non-condensing
Dimension: mm(L)xmm(W)xmm(H)
hdmi splitter switch all in one Panel Description:
Front Panel:
4 OUPUT INDICATOR
5 POWER INDICATOR
6 SOURCE SELECTION BUTOON
Rear Panel:
1 HDMI INPUT/OUTPUT 2 POWER SUPPLY INPUT
Installation:
1. Connect HDMI input/output port to the signal source equipment or display with a single HDMI A Male to A Male cable, input and output signal can be transmitted through this single HDMI cable. When hook up a source device such as DVD, HD Smartbox will identify the input signal and the input indicator will illuminate accordingly; when connect to display, HD Smartbox will identify the output signal and the output indicator will light up.
2. When used with Hailink's custom wall plate ( sold separately), you can hook up source and display to HD Smartbox through a signle HDMI cable. This will enable you to control the devices freely without resetting up the connection.
3. Remote control:
Step 1: Firstly select display from 1 2 3 4 5 on the remote.
Step 2: Press previous and next button to select source.
4. With an IR extension cable( sold separately ), you can put the unit out of sight, such as hide it in a cabinet.
5. Plug the 12VDC power supply into the unit and connect the adaptor to AC outlet.