This test method covers the determination of resistance to the formation of pills and other related surface changes on textile fabrics. The method utilizes the Random Tumble Pilling Tester. The procedure is generally applicable to all types of woven and knitted apparel fabrics.
Note:- For other methods of testing the pilling resistance of textiles, refer to the following ASTM methods: D3511 test for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester Method. D3514 Test for Resistance of Apparel Fabrics to Pilling (Elastomeric Pad Method) For directions covering the measurement of resistance to pilling by the Appearance Retention Tester, refer to Method D 1375 in the 1973 Annual Book of ASTM Standards, Part 24. For direction covering the measurement of resistance to pilling by the Inflated Diaphragm Tester and the Reciprocating Table Tester, Refer to Method D 1375 in the 1966 Annual Book of ASTM Standards, Part 24.
2. Some fabrics that have been treated with a silicone resin cannot be satisfactorily tested by this procedure because the silicone resin appears to rub off on the cork liners in the test
chamber and to cause erroneously low results.
3. This standard may involve hazardous materials, operations, and equipment. This standard
does not purport to address all of the safety problems associated with its use. It is the
responsibility of who ever uses this standard
to consult and establish appropriate safety and health practices and determine the applicability
of regulatory limitations prior to use.
REFERENCED DOCUMENTS :
ASTM Standards: D123 Terminology Relating to Textiles.
D1776 Practice for Conditioning Textiles for Testing.
F 104 Classification System for Nonmetallic Basket Materials.
DEFINITIONS :
1. Fuzz : untangled fibre ends that protrude from the surface of a yarn of fabric.
2. Pilling resistance : resistance to the formations pills on a textile fabric.
3. Pills : Bunches or balls of tangled fibers that are held to the surface of a fabric by one or
more fibers.
4. For definitions of other textile terms used in this method, refer to Terminology D123.
Net Weight:70kg
Note:- For other methods of testing the pilling resistance of textiles, refer to the following ASTM methods: D3511 test for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester Method. D3514 Test for Resistance of Apparel Fabrics to Pilling (Elastomeric Pad Method) For directions covering the measurement of resistance to pilling by the Appearance Retention Tester, refer to Method D 1375 in the 1973 Annual Book of ASTM Standards, Part 24. For direction covering the measurement of resistance to pilling by the Inflated Diaphragm Tester and the Reciprocating Table Tester, Refer to Method D 1375 in the 1966 Annual Book of ASTM Standards, Part 24.
2. Some fabrics that have been treated with a silicone resin cannot be satisfactorily tested by this procedure because the silicone resin appears to rub off on the cork liners in the test
chamber and to cause erroneously low results.
3. This standard may involve hazardous materials, operations, and equipment. This standard
does not purport to address all of the safety problems associated with its use. It is the
responsibility of who ever uses this standard
to consult and establish appropriate safety and health practices and determine the applicability
of regulatory limitations prior to use.
REFERENCED DOCUMENTS :
ASTM Standards: D123 Terminology Relating to Textiles.
D1776 Practice for Conditioning Textiles for Testing.
F 104 Classification System for Nonmetallic Basket Materials.
DEFINITIONS :
1. Fuzz : untangled fibre ends that protrude from the surface of a yarn of fabric.
2. Pilling resistance : resistance to the formations pills on a textile fabric.
3. Pills : Bunches or balls of tangled fibers that are held to the surface of a fabric by one or
more fibers.
4. For definitions of other textile terms used in this method, refer to Terminology D123.
Net Weight:70kg