Pre-stressed Concrete Spun Pole Spinning Machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
If you have any question, please don't hesitate to contact me.
Working Principle
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.
Technical Parameter
|
top end inner diameter (mm)
|
Tread (mm)
|
Running wheel diameter (mm)
|
Length (m)
|
|
150
|
2000
|
600
|
7-12
|
|
170
|
2000
|
600
|
7-12
|
|
190
|
2000
|
650
|
7-15
|
|
230
|
2000
|
650
|
6-9
|
|
300 equal diameter
|
2000
|
600
|
6-9
|
|
350 equal diameter
|
2000
|
650
|
6-12
|
|
310
|
2000
|
650-780
|
6-15
|
If you have any question, please don't hesitate to contact me.