HDMI Miracast WIFI to HDMI Support IOS and Android WIFI Display Support 1080PThis HDMI Miracast is a high-definition signal receiver which supports WIFI display. It can support kinds of wireless transmission protocol, including DLNA, airplay, miracast and airFun. After connecting HDMI Miracast with tablet, notebook, mobile phone and other portable devices, the video from the portable devices can be transferred to HDTV or projector.This HDMI Miracast can adapt to the TV output automatically. It can support the resolution up to 1080P/60Hz, including 480P/480I/576P/720P/1080I.
Features
1. Support IOS and Android system WIFI display
2. Support HDMI 1.33. Support resolution 480P/480I/576P/720P/1080I/1080P4. Support WIFI 2.4G/3G/4G/5G, support 2.4G and 5G dual band antenna5. Support charging by mini USB6. Support switch button to control ON and OFF, support restore factory setting7. Support one source to one sink WIFI display
Physical interface diagram
①: HDMI output port②: Mini USB port for charging③: Power indicator light④: HDMI output indicator light⑤: Switch button⑥: Reset button⑦: Heat dissipation hole
Typical application1. WIFI display setting for IOS and Android system1). Iphone airplay modeSetting for IOS system mobile phone, tablet, notebook and other portable devices1>Connect mobile phone wifi to HDMI Miracast2>Click the airplay on the phone, choose HDMI Miracast, then open the mirroring switch;3>Users can see the full mirroring on the display
PS:
1. If you don't open the mirroring switch, you can only see the WIFI display of video, music and picture.2. Only Ipad2/Iphone4S and above can support mirroring WIFI display.2)Android Miracast mode1>Click mobile phone system setting->choose display->choose WIFI display2>Find HDMI Miracast, click connection3>Open mobile phone WIFI setting, connect to the router, then the mobile can transfer the video and surf the internet at the same time.
PS: Different mobile phones have different names and opening settings of miracast.3) DLNA wireless multimedia share1>Install " Joylink" on the mobile phone and computer2>Open WIFI, and connect " Joylink" to HDMI Miracast3>Open " Joylink" PC share: Drag the file to " Joylink" window, then you can see the WIFI display on the TV or projector.4) Online video screen share1>Connect HDMI Miracast to TV, power on and switch on2>Make sure HDMI Miracast have been connected to the network properly3>After selecting HDMI Miracast as their player, the DLNA supported third-party application, such as PPTV, Tencent video can WIFI display the online video from the mobile to TV or projector.
2. Connection setting for HDMI Miracast to networkHDMI Miracast can broadcast the online video and upgrade itself after connecting with the Internet. And it needs instruction when it is connected to the internet for the first time.Pls follow this :1.Connect HDMI Miracast to TV, power on and switch on2.Open WIFI, connect with HDMI Wifi-xxx (The last three number depends on numbers shown on your display.)3.Open a browser, and enter URL address which is shown at the bottom of your TV, such as: http:// 192.168.59.254/remote4.Click " WIFI Setup" and connect, then choose " WIFI Connection" 5.Choose the connectable WIFI, enter your password6.After the connected WIFI showing on TV, the connection is well finished. And the HDMI Miracast will save connection setting automatically.
SpecificationsHDMI resolution……………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport video format …………………………..…………. …........................................8bitSupport audio format………………….………………………………………………..LPCMMax baud rate…….…………….…….……………………………………. ……….1.5GbpsInput and output TMDS signal…….………………….……..…………… 0.5~1.5Volts p-pInput and output DDC signal ……………………………………..……….. 5Volts p-p (TTL)Output cable distance…………………….….............≤15m AWG26 HDMI standard cableMax working current……………………………………………………………………...0.5APower adapter format……………Input:AC(50Hz, 60Hz) 100V-240V; Output:DC5V/1AOperating Temperature range……..…………….……….………………… ..(-15 to +55℃)Operating humidity range…………….….…………….….5 to 90%RH (No Condensation)Dimension (L x W x H)……………………….………………….……………84x50x10 (mm)Weight…..………………..……………………………………………………….………….50g
Connection and Operation1. Connect the 5V power supply with HDMI Miracast2. Connect HDMI Miracast output to the TV display with HDMI cable3. Users can switch the HDMI Miracast ON and OFF by pressing the switch button on the side4. Connect the signal source with HDMI Miracast through WIFI
Notes:Please use correctly and maintenance properly, to ensure product performance and work properly1. Should Stay away from damp, high temperature, dusty, corrosion and oxidation gas environment in order to avoid damage2. All parts should avoid strong vibration, no collision tapping and drop fall, to avoid damage.3. Do not touch the unit power adapter plugs with wet hand4. Unplug the adapter plug from the power socket, please hold the plug, don't pull the power cord5. Please turn off the power supply when not use the machine.(unplug the power adapter plug when not use for a long time)6. Please do not open the machine cover, do not touch any device in the machine.7. Please use the power adapter provided or approved by the manufacturer
The Package includes1. HDMI Miracast x1pc2. 5V/1A DC Power adapter x1pc3. User Manual x1pc