Contact arrangement:   DPDT (2 Form C)
Contact rating:   0.5A 125VAC / 2A 30VDC
Terminal type:   PCB type;   Standard SMT (pin to pin 7.5mm);   Short SMT (pin to pin 6.6mm)
Sort:   Single side stable;   1 coil latching
Construction:   Wash tight type
Packing:   Plastic tube;   Reel & tape <only for SMT type>
Rated voltage:    DC 1.5, 3, 4.5, 5, 6, 9, 12 & 24V
Must operate voltage:   75% of rated voltage Max. <for single side stable>

Must dropout voltage:   10% of rated voltage Min. <for single side stable>
Set / Reset voltage:   10% of rated voltage Max. <for 1 coil latching>
Maximum voltage:   150% of rated voltage Max. <for single side stable>;   200% of rated voltage Max. <for 1 coil latching>

Power consumption:   0.14W <for single side stable>; 0.10W <for 1 coil latching>;  0.20W <for 24VDC>

Operate time:   <3ms

Release time:   <3ms

Contact resistive:   70m(ohm)
Switching voltage:   AC 250V / DC 220V

Insulation resistance:   1,000M(ohm) (500 VDC)

Dielectric strength:   1,000VAC (50Hz/min) Between open contacts / 1,800VAC (50Hz/min) Between coil and contact
Surge voltage (FCC):   1,500V (FCC Part 68) Between open contacts (10 x 160µs) / 2,500V (Telecordia) Between coil and contact (2 x 10µs)

Operation life:   10⁸ (Mechanical) / 5 x 10⁵ (Electrical)

Ambient temperature:   -40°C to +85°C

Size:   10(L) x 6.5(W) x 5.4(H) mm <PCB type>;   10(L) x 6.5(W) x 5.65(H) mm <SMT type>

Weight:   0.8g