Product Main

Specifications

 Portable Dissolved Oxygen Meter BT820 / Dissolved Oxygen Meter
Bante820 is a basic portable dissolved oxygen meter that used

for measuring the dissolved oxygen concentration or percent

saturation in water.
 

Order code and Accessories:

Bante820
Dissolved Oxygen Probe (Made in US)
Electrolyte Solution
Membrane Cap Kit
Batteries and Carrying Case
Features:

1 or 2 points auto-calibration (100% in saturated air or air-saturated

    water, 0% in zero oxygen solution).

Manual salinity and barometric pressure compensation.

Selectable readout in ppm, mg/L or % saturation.

Selectable either temperature units between degrees Celsius (°C)

    and degrees Fahrenheit (°F).
Automatic Temperature Compensation ensures highly accurate
    measurements over the entire range.
Manual  temperature calibration provides  accurate  measured value.

Hold function freezes the current displayed value for easy viewing

    and recording.

Help message as a operational guide to helps you understand how

    to use meter.

Setup menu lets user customize temperature units, date and time to

    meet measurement requirements.

Expanded memory stores and recalls up to 48 readings.

Built-in  real-time clock stamps  stored data to meets GLP standards.

Stored data can be transferred into personal computer via USB

    communication interface.
 
 
 

       

 
  Specifications:      
     Model   Bante820      
   Dissolved Oxygen Range   0.0~20.0mg/L or ppm    
   Resolution   0.1mg/L    
   Dissolved Oxygen Accuracy   ±0.5mg/L    
   % Saturation of Oxygen   0.0~200.0%
   Accuracy   ±10%
   Temperature Range   0.0~50.0°C, 32.0~122.0°F
   Temperature Accuracy   ±0.5°C
   Temperature Calibration   Manual
   Temperature Compensation   0~40°C, 32~104°F, Automatic
   Salinity Correction   0~35g/L
   Barometric Pressure Correction   60.0~112.5kPa, 450~850mmHg
   Sensor Type   Polarographic Sensor (Order Code: DO100)
   Connector   6-pin
   Hold Function   Manual
   Memory   48 data sets with Date/Time stamping
   Output   USB Communication Interface
   Power Requirements   1×9V/800mA battery
   Battery Life   Approximately 150 hours
   Dimensions   185(L)×88(W)×32(H)mm
   Weight   300 grams