1)Description:
truck wheel machine -------Wheel Disc Production Line----Spin Forming----XYJ-3 Wheel Spoke Spinning Machine ---Spoke Making Machine
2) Principle:
Metal Spinning is to set metal blank onto the mandrel, then to Spin together with mandrel
along with the spindle. The Spinning Wheels will press the surface of blank and
move along the generatrix shape of mandrel under its pressure by taking advantage of
hydraulic copying and templates to Enable the deformation of the metal material and
gain products which are same as the templates curve.
along with the spindle. The Spinning Wheels will press the surface of blank and
move along the generatrix shape of mandrel under its pressure by taking advantage of
hydraulic copying and templates to Enable the deformation of the metal material and
gain products which are same as the templates curve.
3.Character:
(1Due to the connection of spinning wheels and metal material is line or point,Good metal deformation could be achieved under smaller pressure of oil cylinders.
(2)High utilization of material
(3)Small RA of Surface Roughness of Products, normally to be 3.2-1.6
(4)Grain crystalloid, Increase the Strength of Finished Products.
As a wheel spoke manufacturing lathe with full hydraulic operating mechanism controlled by PCL, this machine enjoys simple operation, good working efficiency, high utilization of material and smooth surface without drag mark. Meanwhile, refined grain helps improve the strength of products. Thus, it is the only one in replacement of pressure machine in the segment of automobile wheel in domestic industry.
4.Main Parameter:
| Main Shaft Speed | 220r/min |
| Max Diameter of Blank | Φ650mm |
| Max thinkness of Blank | 16mm |
| height of spinning products | 140mm |
| range of spinning products | 15"--24.5" |
| gross power | 167kw |
| roughness of spinning products | 3.2--1.6 |
| product efficiency | 50-60pcs/hour |