Function & Feature

 
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.

 

Specifications
Inputs:
System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V
Absorbed power 0.1VA
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Respones time <350ms
Load Resistance
Current output: 0<Lr<0.6KB;
Voltage output: Lr>2KB
Overload:
Current 2 times continuous,20 times /1s
Voltage 2 times continuous
Auxiliary Supply:
DC 12V/24V/48V
AC 110V, 230/240V AC 20%, 1.5VA
Isolation: Galvanic isolation between input, output circuits and auxiliary supply
Insulation Resistance >20MB (DC500V)
Test voltage 2KV RMS 50Hz for 1 minute
impulse 4KV 1.2/50Ksec waveform
Temperature:
Operating -10~55C
Storage -40~70C, 20 ~ 93%RH ; Noncondensing