Stitch Welder
This Stitch Welder machine is a semi automatic stitchseam welding machine, designed for welding round duct / pipe / drums in large diameter range.
I Main features:
☆ Large diameter range: 100mm~1500mm (5”~59”)
☆ High production efficiency
☆ Good welding quality because of adopting double-wire technology
☆ Reasonable structure and simple maintenance: compact structure; welding electrodes and main driving mechanism are of simple assembly.
☆ Fast change welding pipe diameter
☆ PLC & inverter control the welding speed and stitch welding pitch
II Technical data
2.1 Diameter range: 100-1500mm (5 to 59”)
2.2 Length of pipe/tube/duct/drum: 50-1000mm (2 to 40”)
2.3 Thickness of material: 0.4-1.2mm (28 to 18ga) **
2.4 Suitable material: galvanized steel, carbon steel, stainless steel
2.4 Welding speed: 4-12m/min (13 to 40ft/min)
2.5 Total power: 55kW, 3 phase, 50Hz, 380V
2.6 Specification of fuse: 3x120A
2.7 Compressed air needed: 0.6MPa (dry, clean)
2.8 Copper wire diameter: 1.8mm-2.0mm, tension strength more than 210MPa, elongation 25%
2.9 Cooling water: 0.4-0.6MPa, 12-15°C, 7L/min, cooling motor power 6kW
2.10 Copper staved width: 2.28+0/-0.05mm (should be exact)
2.11 Weight: about 1150kg
Note: When diameter is 0.8 to 1.2mm, double-wire should be used. When diameter less than 0.8mm, single-wire can be used.
III Buildup of the machine
3.1 Frame base
3.2 Welding core stem: 88mm diameter
3.3 Upper welding wheel: 120mm
3.4 Copper wire system: included feeding, staving, cleaning, tension controlling, wire cutting and recycling.
3.5 Water cooling system and flux controlling system
3.6 PLC control system and control panel