Our Bemo large span roof roll forming machine is mobile type either on a chassis or in a 20' container, for site working.

 

Its technology is similar to Germany Bemo machine.

A. Technical data:

1. Electric requirement: 380v/3ph/50hz

2. Hydraulic motor power: 7.5 kw

3. Weight: 5 tons

4. Machine installation dimension:

(lxwxh) 7mx1.5 mx1.3 m

5. Forming speed: 10 - 15 m per min

6. Thickness 0.4 - 0.8 mm, 0.5 mm for test run and inspection

7. Material width: Approx. 750 or 610 mm

8. Effective width of roof profile: 610 or 470 mm

9. Max. Material strengthen: Cold rolled, pre-painted or galvanized coils or galvalume coils

10. Cutting tolerance: Approx. 2mm (length = 5,000mm)

 

B. Features:

- interconvert automatically two levels of speed when stop and start.

- automatically shearing at any length with pre-setting quantity (10 programs).

- signal feedback from encoder showing current length of product.

- automatically alarm to rear shearing before the order finished.

- two shearing sets, one in the front and one in the rear.

- rolling wheel and shearers made of alloy steel, thermo-hardened, chromium plating get hardness 60-65hrc.

- hydraulic system is equipped with water cooling system to allow the machine working constantly from 12 to 16 hours per day.