Specifications
1.pp melt blown filter cartridge
2.MIcron pp material
3.High filtration efficiency
4.water filter cartridge
2.MIcron pp material
3.High filtration efficiency
4.water filter cartridge
10 inch PP water filter cartridge -Product Advantage
(1) Uniform working in full filter element/epoxy coated filter
(2) With stainless steel threaded coupling centers and interface connector.
(3) The special design for backflushing .
(4) High-pollution capacity in full-length filter.
(5) Run a small resistance, strong adsorption.
(6) Provide different sizes filter element for powdex/ pre-filters.
(7) Large flow rate, smaller area, easily installation.
(8) Simple system.There is no pollution acid consumption and waste, deal with the waste easily to protect for well environment.
(9)Low-cost investment , small pressure loss during the treatment
(2) With stainless steel threaded coupling centers and interface connector.
(3) The special design for backflushing .
(4) High-pollution capacity in full-length filter.
(5) Run a small resistance, strong adsorption.
(6) Provide different sizes filter element for powdex/ pre-filters.
(7) Large flow rate, smaller area, easily installation.
(8) Simple system.There is no pollution acid consumption and waste, deal with the waste easily to protect for well environment.
(9)Low-cost investment , small pressure loss during the treatment
10 inch PP water filter cartridge-Filter element specification
1,Filter element diameter(mm): OD φ30/65,IDφ28/65
2,Filter element length(mm):250,500,750,1000
3,Filter precision(μm):1 3 5 10 15 20 30 50 70 100
4,Filter type: frame, non-frame ,external sheath
5,Filter element connector:planar,222 type,226 type
6,End cap: planar, fin type
1,Filter element diameter(mm): OD φ30/65,IDφ28/65
2,Filter element length(mm):250,500,750,1000
3,Filter precision(μm):1 3 5 10 15 20 30 50 70 100
4,Filter type: frame, non-frame ,external sheath
5,Filter element connector:planar,222 type,226 type
6,End cap: planar, fin type
10 inch PP water filter cartridge -Service conditionµ
1.Operating pressure≤0.5MPa
2.Differential pressure≤0.35MPa
3.Operateing temperature≤80°C
2.Differential pressure≤0.35MPa
3.Operateing temperature≤80°C
4.Flow:(0.1MPa)1-2T/h
10 inch PP water filter cartridge -PP filter models
|
Name
|
Description
|
Material
|
|
PP filter 10"
|
Length:250,254mm
OD:62mm
ID:2830mm
Filtration Rating:0.5-100μm
|
Polypropylene
|
|
PP filter 20"
|
Length:500,508mm
OD:62mm
ID:28,30mm
Filtration Rating:0.5-100μm
|
Polypropylene
|
|
PP filter 30"
|
Length:750,762mm
OD:62mm
ID:28,30mm
Filtration Rating:0.5-100μm
|
Polypropylene
|
|
PP filter 40"
|
Length:1000,1016mm
OD:62mm
ID:28,30mm
Filtration Rating:0.5-100μm
|
Polypropylene
|