Rubber & plastic dispersion mixer/rubber kneader

Rubber kneader/dispersion/kneader

 

This mixer is a new and high-tech equipment developed for the mixing of high-power or low-power foaming plastics and for the foaming of rubber and plastics products. 

Specifications:1L-200L

Features:

1. This mixer is new and high-tech equipment developed for the mixing of high-power or low-power foaming plastics and for the foaming of rubber and plastics products.
2. This mixer possesses of the automatically contstant temperature water supply system and the high and low pressure control device of ram.
3. This mixer prosseses of the time sequential control and temperature sequential control functions.
4. According to the requirement, the revolution speed of front rotor can be raised up to Upwards of 40r/min.
5. According to the request of users, the heating mode can be provided with the steam heating, electric heating or heating by heat conductive oil.
6. This product is a most ideal plastics mixing.

Molde/Item		X(S)N-3×32	X(S)N-5×32	X(S)N-10×32	X(S)N-20×32	X(S)N-25×32	X(S)N-35×30	X(S)N-55×30	X(S)N-75×30	X(S)N-  110×30	X(S)N-  150×30
Total volume of mixing chamber	L	8	15	25	45	55	75	125	170	250	325
Working volume of mixing chamber	L	3	5	10	20	25	35	55	75	110	150
Driving motor power	kW	5.5	11	22	37	37	55	75	110	185	220
Tilting motor power	kW	0.55	1.1	1.1	1.5	1.5	2.2	2.2	3	5.5	11
Tilting angle	°	140	140	140	140	140	140	140	140	140	135
Rotational speed of the rotor (front /rear)	r/min	32/24.5	32/23.5	32/25	32/27	32/27	30/24.5	30/24.5	30/24.5	30/24.5	30/24.5
Pressure of compressed air	MPa	0.5~0.8	0.6~0.8	0.5~0.8	0.6~0.8	0.6~0.8	0.5~0.8	0.6~0.8	0.6~0.8	0.6~0.8	0.6~0.8
Capacity of compressed air	m3/min	≥0.3	≥0.5	≥0.5	≥0.7	≥0.7	≥0.9	≥1.0	≥1.0	≥1.5	≥1.0
Pressure of cooling water (rubber mixing )	MPa	0.2~0.4	0.2~0.4	0.2~0.4	0.2~0.4	0.2~0.4	0.3~0.4	0.3~0.4	0.3~0.4	0.3~0.4	0.2~0.4
Pressure of heating steam (plastics mixing )	MPa	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.4~0.8