Features

Dual data-rate of 1.25Gbps/1.0625Gbps operation

850nm VCSEL laser and PIN photodetector

Duplex SC optical interface

Standard serial ID information compatible with SFF-8053

550m transmission with 50/125 µ m MMF

275m transmission with 62.5/125 µ m MMF

+3.3V/5V single power supply

RoHS Compliant

Operating case temperature: 0 to +70℃

 

Applications

Switch to Switch interface

Switched backplane applications

Router/Server interface

Other optical transmission systems

 

Description

The GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps 1.25Gbps/1.0625Gbps and from 500m transmission on 50/125 µ m MMF.

 

The transceiver consists of two sections: The transmitter section incorporates a VSCEL laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All odules satisfy class I laser safety requirements.

 

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.

 

The standard serial ID information Compatible with GBIC MSA describes the transceiver’ s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053