Gantry CNC Plasma/Flame Cutting Machine
This CNC Plasma Cutting Machine adopts gantry structure, transversal span : 3m, 4m, 5m, 6m and so on, dual drive; It can add additional cutting torches, and do abnormality cutting & Strip cutting. It can greatly improve the production efficiency and reduce thermal deformation.
CNC and Strip cutting
When you want to cut a piece of plate into many strips, we can add Strip cutting tips, to cut many strips for one time. This can greatly improves the production efficiency, and make two sides of strip be heated evenly while cutting, avoid thermal deformation.
When you want to cut a piece of plate into many strips, we can add Strip cutting tips, to cut many strips for one time. This can greatly improves the production efficiency, and make two sides of strip be heated evenly while cutting, avoid thermal deformation.
Basic Configuration
1. Span width 4000mm
2. Rail length 6000mm
3. CNC flame cutting torch 1 set
4. Automatic ignition 1 set
5. Pipeline& pipe racks device 1 set
6. Lognitudinal drive mode Servo motor, rack
7. Pipeline drive mode transversal towline, Lognitudinal rack
8. Cutting Gas Oxygen& Acetylene(or Propane)
9. Plasma source optional
10. CNC system WUHAN LANSUN CNC
11. Straight line torches 2-11 set(optional)
12. Drive system/motor Chinese three phase AC motro& driver
Cutting Range
1. Effective cutting width 3200mm
2. Effective cutting length 4800mm
Cutting Index
3. Flame Cutting Thickness 6-200mm
4. Perforation thickness < =80mm
3. Flame Cutting Thickness 6-200mm
4. Perforation thickness < =80mm
Machine Features
5. Cutting torch Elevation Height 150-230mm
6. Cutting speed 0-3500mm/min
7. Cutting error < =+-0.5mm
5. Cutting torch Elevation Height 150-230mm
6. Cutting speed 0-3500mm/min
7. Cutting error < =+-0.5mm