1. Force feeding system:

Feeding mode: side roller pressing feeding, easy cleaning

Feeding system: side roller pressing gear and screw gear mesh belt lubricated, with static state protector for the feeding hopper

 

2. Extruding system:

Screw material: 38GrMoAcA

Hardness: 900-950HV

Cylinder liner hardness: 950-1000HV

Nitriding depth: 0.4— 0.7mm

Screw structure is well vacuumized.

Single die head: one set with filtering plate

Single die head is locked with extruder by fast grip ring

Extruder center height: 1070mm± 20mm

Pressure control: pressure sensor equipped with pressure protection adjustable 0-35MPA

L/D ratio: 14:1

Screw diameter: 65mm

Screw speed: 0-55r/min

Max capacity: 140KG/H

 

3. Temperature control system: mold temperature control

Heating zones/ power: 3 zones, 3KW× 3

Cooling zone: 1 zone

Cylinder and screw heating mode: hot water circulation, and water circulation

Water circulation pump: Weile

Single die head: one

Water cooling: 0.15-2KG/C ㎡

 

4. Driving system:

Voltage: AC380V, 50HZ

Screw and hard tooth surface gear reducer connected by spline.

Driving motor equipped under gear reducer with high strength V belt

Hard tooth surface gear reducer: ZLYJ250-20-1

Total power: 50KW

Dimension: 2200(L) × 1000(W) × 1520(H) mm

Speed adjusting mode: frequency conversion speed adjusting

Frequency converter: Taiwan Delta

Main motor power: 37KW

 

After-sale service:

1. On-site installation and trial available

2. Guarantee for one year (12months)

3. Long-term spare parts supply.

4. Long-term technical support service.