Technical parameter and quotation of Plastic Corrugated Pipe Machines

General description:

1. Power supply: 380V/ 3phase/ 50HZ

2. Material processing: PVC, PP or PE granule material

3. Pipe diameter range: φ 9— φ 32mm

 

Single screw extruder SJ— 45/28

ABB speed controller with frequency inverter

Screw cylinder: 38CrMoALA nitriding processed, water cooling force feeding zone

Screw: 38CrMoALA nitriding processed

 

Technical parameter:

Screw diameter: 45mm

Screw length and diameter ratio: 28:1

Screw nitriding layer depth: 0.4-0.6mm

Hardness: HV> 740

Screw cylinder nitriding layer depth: 0.5-0.7mm

Hardness: HV> 940

Screw cylinder heating zones: 4 zones, cast aluminium heating circle

Heating power: 4KW*3 zones

Screw cylinder cooling zones: 4 zones air cooling,

cooling fan power: 3 zones*0.16KW

Extruding capacity: 40KG/H

Gear reducer: hard tooth face gear reducer, gear material 20CrMoTi, after nitriding quenching gear grinding processed, with the cooling device. With high bearing capacity, stable transmission, low noise, higher efficiency characteristics.

 

Driving motor power: 11KW, frequency control

Die head, mold

Material: 45#Forging quenching and tempering processed, specification: 14mm, 22mm

Die head heating: stainless steel heating circle, one zone for heating

Each size mold quantity: 42 pairs

Mold length: 42*56.55=2375.1mm

Cooling way: air cooling, fan power: 0.06KW

Fan quantity: 2sets each side

Mold dimension: 56.55*56*70mm

Applied for pipe diameter: φ 9-32mm(corrugated pipe inner diameter)

 

Corrugated pipe molding/shaping machine

Mold quantity: 1piece, water cooling

Material: iron casting processed

Transmission: gear transmission

Gear reducer: worm wheel gear, worm gear reducer one set, gear reducer one set

Dragging speed: 5-12m/min

Driving power: 1.5KW, frequency control

Counting: by sensor

 

Recoiling machine one set

 

Main appliances:

Siemens contactor, Omron temperature controller, ABB frequency converter