Ore Crushing Machine-Cone Crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, Spring cone crushers designed by SBM with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Ore Crushing Machine-Cone Crusher Main Parts:
spring cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
We also offer spare parts and original wear parts related to the spring cone crusher.
Ore Crushing Machine-Cone Crusher Working Principle:
Cone crushers crushe materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Ore Crushing Machine-Cone Crusher Main Technical Data:
Cone crushers crushe materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Ore Crushing Machine-Cone Crusher Main Technical Data:
| Type |
Outside diameter Of crushing cone(mm) |
Max feed size (mm) |
The adjusting range of discharger (mm) |
Crushing capacity (t/h) |
Electric motor power (kw) |
Speed of Eccentric shaft (r/min) |
weight (T) |
Overall dimensions (LхWхH)(mm) |
|
| PYB | 600 | 600 | 65 | 15-25 | 40 | 30 | 356 | 5 | 2234х1370х1675 |
| PYD | 35 | 3-13 | 12-23 | 5.5 | 2234х1370х1675 | ||||
| PYB | 900 | 900 | 115 | 15-30 | 50-90 | 55 | 333 | 11.2 | 2692х1640х2350 |
| PYZ | 60 | 5-20 | 30-65 | 11.2 | 2692х1640х2350 | ||||
| PYD | 50 | 3-13 | 15-50 | 11.3 | 2692х1640х2350 | ||||
| PYB | 1200 | 1200 | 145 | 20-50 | 110-168 | 110 | 300 | 24.7 | 2790х1878х2844 |
| PYZ | 100 | 8-25 | 42-135 | 25 | 2790х1878х2844 | ||||
| PYD | 50 | 3-15 | 18-105 | 25.3 | 2790х1878х2844 | ||||
| PYB | 1750 | 1750 | 215 | 25-50 | 280-480 | 160 | 245 | 50.3 | 3910х2894х3809 |
| PYZ | 185 | 10-30 | 115-320 | 50.3 | 3910х2894х3809 | ||||
| PYD | 85 | 5-13 | 75-230 | 50.2 | 3910х2894х3809 | ||||
| PYB | 2200 | 2200 | 300 | 30-60 | 59-1000 | 280-260 | 220 | 80 | 4622х3302х4470 |
| PYZ | 230 | 10-30 | 200-580 | 80 | 4622х3302х4470 | ||||
| PYD | 100 | 5-15 | 120-340 | 81.4 | 4622х3302х4470 | ||||