TP-2606 (Dual Range)
|
Introduction |
|
TP-2606 switching mode DC power supply provides 375W output capacity with three independent outputs and CH1/CH2 dualrange output (30V/6Aor 60V/3A), which accommodates a wide range of applications. On the basis of fixed output capacity, it enables output voltage or current to the maximum. With high power density and high conversion efficiency, multiple protections, high reliability, low noise and compact design, TP-2606 is completely adequate for satisfying mainstream power supply demands.
|
|
Features |
|
ü CH1/ CH2 dualrange output of30V/6A or 60V/3A ü CH3 0.1~5V/3A, adjustable output ü Constant voltage and constant current operations ü Auto Series and Parallel tracking operations, providing flexible output of 30V/12A, 60V/6Aor 120V/3A ü High power conversion efficiency, improving the power efficiency by 25% ü Manual and remote ON/OFF control ü Manualover voltageprotection ü Over voltage, over load, over temperature and reverse polarity protections ü Power source AC115V/230Vauto switch ü Fan speed control circuit, minimizing fan acoustic noise ü Compact design, light weight |
Specifications
|
Model |
TP-2606 |
|
Output |
CH1&CH2Independent mode: 0~30V/0~6A; 0~60V/0~3A CH1&CH2Series mode: 0~60V/0~6A; 0~120V/0~3A CH1&CH2Parallel mode: 0~30V/0~12A; 0~60V/0~6A CH3: 0.1~5V/3A |
|
Constant voltage operation |
|
|
Line regulation |
≤0.01%+3mV |
|
Load regulation |
≤0.01%+5mV (rating current≤6A); ≤0.01%+8mV (rating current≤12A) |
|
Riple & Noise |
≤5mVrms (5Hz~1MHz); ≤50mVpp (20Hz~20MHz) |
|
Recovery time |
≤100us (50% load change, minimum load0.5A) |
|
Constant current operation |
|
|
Line regulation |
≤0.2%+3mA |
|
Load regulation |
≤0.2%+3mA |
|
Riple & Noise |
≤3mArms |
|
Tracking operation |
|
|
Tracking error |
≤(0.5%+10mV) of the master |
|
Series regulation |
≤300mV |
|
Riple & Noise |
≤10mVrms (5Hz~1MHz); ≤100mVpp (20Hz~20MHz) |
|
Remote output On/Off response time |
|
|
Voltage up(10%~90%) |
≤100ms (≤95% rated load) |
|
Voltage down(90%~10%) |
≤100ms (≥10% rated load) |
|
CH3 output |
|
|
Output voltage |
0.1~5V, adjustable |
|
Output current |
3A |
|
Protection |
Over voltage, over load, over temperature and reverse polarity protections |
|
Over voltage protection |
|
|
Accuracy |
±(0.5% reading+0.5V) |
|
Display |
|
|
Voltmeter |
31/2 digits0.39" LED display |
|
Ammeter |
31/2 digits0.39" LED display |
|
Resolution |
100mV/10mA |
|
Accuracy |
±(0.5% reading+2 digits) |
|
Protection |
Over voltage and reverse polarity protections |
|
Remote control |
Output On/Off |
|
Fan noise |
≤50dB |
|
Temperature co-efficient |
Voltage: ≤100ppm/℃+3mV |
|
Current: ≤150ppm/℃+3mA |
|
|
Insulation |
Between chassis & terminal: ≥100MΩ/1000VDC |
|
Between chassis and AC cord:≥100MΩ/1000VDC |
|
|
Operating environment |
0~40℃,≤80%RH |
|
Storage environment |
0℃~70℃, ≤70%RH |
|
Power source |
AC115V/230V±15% auto switch, 50/60Hz |
|
Accessories |
Power cord ×1, Operation manual ×1, Test lead ×1 |
|
Dimension |
310×250×150mm |
|
Weight |
5.5kg |