Rubber curing press

Assembled rubber belts are cured rubber curing press.

 

The portable curing press is made by light aluminum alloy materials, ordinary 3 phases current power supply, uniform temperature on top and down heating plate, uniform pressure (1.0 ~ 2.0 MPa) of water supply system.

 

Rubber curing press is equipped with light Automatic Electronic Control Box, which is connect with mainframe by integrative plug-in and multi-core cable.

 

 

Technical Parameters:

 

1. Vulcanization pressure: 1.0-2.0Mpa; (145Psi-290Psi)

2. Vulcanization temperature: 145 Celsius degree ; (293 Fahrenheit equals)

3. Difference in surface temperature of vulcanized plate: ± 5 Celsius degree; (41 Fahrenheit equals)

4. Calefactive time (at normal temperature to 145 Celsius degree ): ≤30 mins;

5. Power supply voltage: 220V to 660 v; 50/60 Hz; 3Phase;

6. Output power of Electronic Control Box: 36 KW;

7. Temperature adjustment range: 0 to 200 Celsius degree ; (0 to 392 Fahrenheit equals)

8. Timing adjustment range: 0 to 99 min;

9. After the pressurization of 0.8 MPa(=116Psi =8kg/cm²), the gap between upper and lower heating plate is not more than 0.4 mm.

10. Applicable belt width: From 26" to 102" (650-2600mm)

HS code:84778000

Kindly please feel free to contact us if questions.