Product Main

Specifications

Drier
 

Dryer Introduction:
Dryer is mainly used for drying materials with humidity or granularity in the industries of mining, construction material, metallurgy and chemical. And it has strong adaptability to the materials and can dry various materials. Besides, it has simple structure and reliable operation.
In our company, this series applies the new type scatter plate device, and it has many functions, such as direction guide, flow equalization, scattering material and so on. And it can make the material uniformly distributed at radial cross section. Contact the heat airflow completely and use the heat energy fully. Moreover, it adopts reasonable operational parameter, and compared with general dryers, it reduces the coal and power consumption by more than 10-15%, and increases the output by more than 10-15%. At present, it is widely used in cement and mining industries.

Main Technical Parameters:
Spec.(m) Capacity (t/h) Main motor Main reducer Weight (t)
Power (kw) Model Model Ratio
Φ1.2×10 6-8 7.5 Y160M-6 ZL50-16-1 31.5 12.5
Φ1.5×12 8-12 15 Y180L-6 JZQ500-III-2F 31.5 16.5
Φ1.5×15 12-16 18.5 Y200L-6 JZQ500-III-2F 31.5 18
Φ1.8×12 18-20 18.5 Y200L-6 ZQ50-16II-2 31.5 20
Φ2.2×12 22-28 22 Y160L-6 JZQ650-III 31.5 37.6
Φ2.2×14 26-30 22 Y160L-6 JZQ750-III 31.5 40
Φ2.4×14 30-35 30 Y250M-6 JZQ750-III 31.5 51
Φ2.4×18 35-40 37 Y250M-6 ZL85-13-1 27.16 54
Φ2.4×20 38-42 37 Y250M-6 ZL85-13-1 27.16 54.14
Φ2.8×20 43-50 45 Y280S-6 ZL85-13-1 27.16 71
Φ3×20 45-55 55 Y250M-4 ZL100-16-1 41.52 78
Φ3×25 58-70 75 YR280M-4 ZL100-16-1 41.52 93
Φ3.2×25 75-90 90 Y315M-6 ZSY315-22-Ⅱ 22.4 156
Φ3.6×25 95-110 160 Y355L1-4 ZSY500-35 35.5 170
Φ3.6×28 80-140 200 Y355L2-4 ZSY500-35 35.5 180