1.Application

GSG1-100 range separated switch (shortened form separated switch) mainly use in the electricity-distribution networks as the master switch of the power supply to break or make the circuits with loads. When it in switching-on status, it can take the normal working current as well as the specified faulty current within the specified time to ensure the power continuousness of the networks and circuits;while it is in the switching-off status, it can provide the reliable insulating gap to make the electricity-consumer equipment as well as the circuit to be isolated with the power supply and to prevent the electricity-consumer equipments from being damaged due to the over voltage and also ensure the safety maintenance working for the electricity-consumer equipment.

2.Structure feature

 

Products accord with the IEC60947.3, GB14048.3 substances

Through the CCC certification, the EU CE safety certification.

3.Main technical parameters

 

item	parameters	note
type	GSG1-100
Usage classification	AC-22
Rated Insulation voltage	415V
Rated operating voltage	240/415V
Frequency	50/60HZ
Convention thermal current	100A
Rated operating current	32A,63A,100A
Pole	1,2,3,4P
Rated Impulse Withstand voltage	6000V
Short-time with stand current	20le	Time tolerance1s
Rated short-circuit the ability to connect	30le	Making time ≥0.1s
Rated ability to connect	3le
Breaking capacity of rated limit short-circuit	3le
The number of on-load operation	2000
he number of no-load operation	10000
wiring capacity	50mm2

 

 4.Working and installation condition

Normal working condition

Environment temperature : -5°C~+40°C, the average hours of temperature exceeding +35°C during 24 hours.

Elevation:≤2000m

No exceeding 50% at the maximum ambient temperature of 40°C.with lower temperature, higher humidity would be permitted, for example ,with temperature 20°C, the humidity can exceed 90%.Take the special measure to the dews on the surface, which would appear due to temperature change.

Pollution protection: Grade 2

Products should be used in no significant impact and vibration place.

Installation condition

Installing categories: ClassⅡ,Ⅲ(the level of over-load and distribution)

Installing condition: mounted by TH35-7.5 standard rail track.

Switches can be mounted vertically, can also be installed on the level.

5. Production line

 

 

                                                        Raw materials testing