|
metal stud and track roll forming machine
1.Product Description:
1) The product produced by these series light steel keel roll forming machine is used for light steel keel in building. This product will be used for hold ceiling and wall panel.
2) It is with the advantage of lower cost, soon fixture, This series product is common used in different ranges.
3) The width and height are adjustable.
2.Light steel keel roll forming machine processing:
feeder→molding machines→automatic control system for hydraulic cutting→holder→PLC computer control system (from Japan)
Decoiler:
1,Loading capacity,2tons
2,The inside diameter fits for coil, 480~510mm
3,The biggest width capacity,420mm4.
3.Light steel keel roll forming machine composition:
1.Roll forming stations:12 stations
2.Roller material, Gcr15 mould steel
3.The hardness of roller will be HRC=58-60º after heating treatment
4.The rollers are coated with hard chrome
5. Accurate grinding process, roller/axis are processed by grinder
6.Mortor power: 7.5kw
7.Transmission,chain and gear drive with hardened treatment
8.Feeding material thickness: 0.6-1.2mm
9.Specification,as detailed drawing
10.Production efficiency:12m-15m/min
4.Hydraulic cutting
1.Automatic hydraulic control cutting system as setting
2.Hydraulic cutting system, adopt 2.2kw motor
3.Cutting blade material, Cr12 mould steel,with heat treatment, accurate grinded, wire-electrode cutting accurate processing
4.Treatment for cutting blade, the hardness will be HRC60-62°C after heat treatment
5.Electronic control system
Control system, PLC computer control system from Taiwan or Japan
We offer customized sizes, it is helpful that if you can send us the drawing.
|
