Monel 400 bar rod ASTM B164
1,Monel 400 sheet , bar, tube , wire , flange
2,thickness:1-50MM*W100-2000MM*L200-6500MM
1,Monel 400 sheet , bar, tube , wire , flange
2,thickness:1-50MM*W100-2000MM*L200-6500MM
Monel 400 inconel 718 bar rod ASTM B164Monel 400 Chemical composition
Alloy
|
%
|
Ni
|
Cu
|
Fe
|
C
|
Mn
|
Si
|
S
|
Monel400
|
Min.
|
63
|
28
|
|
|
|
|
|
Max.
|
|
34
|
2.5
|
0.3
|
2
|
0.5
|
0.024
|
Monel 400 Physical properties
Density
|
8.83 g/cm³
|
Melting point
|
1300-1390 °C
|
Monel 400 Alloy minimum mechanical properties in the room temperature
Alloy state
|
Tensile strength
Rm N/mm²
|
Yield strength
R P0. 2 N/mm² |
Elongation
A 5 % |
Monel400
|
480
|
170
|
35
|
Monel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel.
Monel 400 Application field
Monel 400 alloy is a multi-purpose material in many industrial applications:
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Sea-water in the use of equipment and propeller shaft
6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment
7. Manufacturing hydrochloric acid equipment used in the production of pump and valve
Monel 400 alloy is a multi-purpose material in many industrial applications:
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Sea-water in the use of equipment and propeller shaft
6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment
7. Manufacturing hydrochloric acid equipment used in the production of pump and valve
Name
|
OD
|
Length
|
Wall
|
Height
|
Remarks
|
Rod
|
φ12-φ300m/m | 500-5000m/m | |||
Flange
|
ASME 16.5(Amecan da),HG20592(Euean da), SH3406(Petchal da) | ||||
Ring
|
φ200-1500 m/m | 20-300 mm | 25-300 mm | ||
Cake
|
φ150-1500 m/m | 25-300 mm | |||
Pipe
|
φ65-200 m/m | 1000-9000m/m | 1.5-25 mm | (Single weight does not exceed350kg) | |
Plate
|
700-2000 m/m | 1-60mm |
Widt500-2000 m/m
|
||
Plate
|
700-2000 m/m | 0.5-3.2 mm |
Width700-1000 m/m
|