Product Main

Specifications

Single stage Hammer Crusher

Single-stage Hammer Crusher Introduction:
This series is suitable for crushing materials with compression strength not more than 200MPa, like limestone, gypsum, coal, marl and sand shale, etc.And it has big crushing ratio(the feeding size can reach to 1000mm, and the discharging size is less than 25mm). As it features simplified crushing process, even product size, simple structure, reliable operation, convenient maintenance, and economic operating expenses.

Main Technical Parameters:
Model Max feed size(mm) Rotor diameter(mm) Rotor length(mm) Sieve residue of discharging size≤15% Capacity(t/h) Motor power(kw) Weight(t)
PCF-1412 600×600×900 1420 1200 ≤25 80-120 220 23.5
PCF-1616 800×800×1000 1650 1630 ≤25 180-220 315-355 43.3
PCF-1616 Ⅱ              
PCF-1618 ≤1m3 1650 1830 ≤25 240-280 400 49.5
PCF-1818 900×900×1000 1850 1830 ≤25 300-350 560 70
PCF-2018 ≤1m3 2020 1802 ≤25 350-500 630-710 89
PCF-2018 Ⅱ 1000×1000×1000     ≤25-75 350-450 630-700  
PCF-2022 1000×1000×1500 2010 2230 ≤30-90% 600-800 800 111
PCF-2022Ⅱ 1000×1000×1500 2010 2230 ≤70-90% 600-800 800 130
PCF-2022Ⅲ 1000×1000×1500     ≤80-90% 700-800 800  
2PCF-1818 1000×1200×1500 1850 1830 ≤75 1000 560 119
2PCF-2030 1000×1000×1500 2020 2230 ≤25 700-900 800×2 142