1.The products manufactured according to ISO9001 quality system.
2.Grade:Y10T,Y20,Y25,Y30,Y30BH,Y35(China standard);C1,C5,C8,C11(U.S.A. Standard)
3.Good temperature stability
4.Raw material is readily avaiable & low in cost
5.Shape: Ring. Other shape is also can be made.
6. Size. Outer&innter diameter, thickness at your choice.
7..Application: speaker, motors, generators and etc..
Advantage
1.Cheapest magnet material
2. Good anti-corrosion performance, no surface treatment needed
3.Excellent temperature stability
4.Compact crystal
5.Could provide isotropic and anisotrpic
Two manufacturing Process
1.Dry process: By dry process, can produce isotropic & anisotropic magnets;the tool can be changed and developed easily.
2.Wet process: By wet process, only anisotropic magnets can be produced;it is complicated to change the tool and the tooling charge is much higher
Magnetization
1.Isotropic ferrite magnets are not oriented and can be magnetized in any direction;
2.Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.
1.Cheapest magnet material
2. Good anti-corrosion performance, no surface treatment needed
3.Excellent temperature stability
4.Compact crystal
5.Could provide isotropic and anisotrpic
Two manufacturing Process
1.Dry process: By dry process, can produce isotropic & anisotropic magnets;the tool can be changed and developed easily.
2.Wet process: By wet process, only anisotropic magnets can be produced;it is complicated to change the tool and the tooling charge is much higher
Magnetization
1.Isotropic ferrite magnets are not oriented and can be magnetized in any direction;
2.Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.