Beam Welding Line Cantilever Welding Machine XMH-1000
XMH-1000 Cantilever auto submerged arc-welding machine
2. Technical parameters
3. Supply range
XMH-1000 Cantilever auto submerged arc-welding machine
1. Brief introduction
The whole machine adopts the structure of cantilever trolley driving way, the main machine combined with traveling structure, cantilever frame body, electric-motion pole lifting structure and level moving structure, arc guiding structure, flux auto recycling system, auto submerged arc welding system, electric control system and so on. This machine is droved by frequency conversion motor system, which drags the whole trolley to do level moving. The flux recycling system recycle the flux and use it again.
2. Technical parameters
|
Serial
|
The parameter supplied by supplier
|
|
1
|
Web height: 200-1800mm
|
|
2
|
Web thickness: 6-40mm
|
|
3
|
Flange width: 200-800mm
|
|
4
|
Flange thickness: 6-40mm
|
|
5
|
Rail span: 1600mm
|
|
6
|
Main machine power: 6kw(not include welding machine)
|
|
7
|
Welding speed: 350-1500mm/min
|
|
8
|
The maximum empty traveling speed: 3500mm/min
|
3. Supply range
Machine assembly: basis seat, traveling structure, transverse slippage structure, wire feeder wheel and so on.
Welding assembly: up-down guide pole, wire feeder machine rack
Arc guide assembly: welding torch, transverse moving structure and accessories.
Flux recycling system: Electrical control box, AC frequency conversion driving system.
Power transmission assembly: Tank chain and accessories.
Welding machine: MZ-1000 submerged arc welding machine (1 set)
4. Technical file
Manual instruction
Packing list
Electric drawing
The whole machine technical specification
The fundament drawing
Certification