Skype firealarm87  /wechat 15220176087

. FEATURES
Detect carbon monoxide.
High quality durable electrochemistry sensor for CO
Gas detection.
Easy to install.
Loud 80dB alarm and LED warning light.
Self diagnostic function by MCU intelligent software.
Excellent reliability & High stability.
Ideal for all house and kitchens.
3. TECHNICAL SPECIFICATIONS
Unit Dimensions: 122mm (H) x 76 mm (W) x 38mm (D)
Color: Ceiling White
Operating Temperature: -10C to +50C
Ambient Humidity: 95% RH
Alarm Horn: 80dB
Operating Voltage: AC220V/50HZ
Power Consumption: <1.5W (Standby), <3W (Alarm)
Value of Detection Threshold (Lower Explosive Limit):
CO Gas: >150ppm (Alarm in 1 to 3 minutes)
Sensor lifetime: > 3 years
Alarm: Red LED with 80dB alarm
Warm up Time: approximately 60 Seconds
Alarm Output: Voltage Output (DC12V pulse or steady)
(Only for Control Module)

CAUTION!
Leave your CO Alarm powered in year-round. CO problems
Can occur any time during the year, and this Alarm can only
Alert you if it is plugged in and receiving power.
this CO Alarm is intended for use in a standard AC220V
Power supply. It is not intended for use in extension cords,
Power strips, or outlets controlled by a switch or dimmer.
these may not provide continuous power to the unit.
When fully powered, it samples the air and takes a new
Reading about every second. A microchip inside the unit
Stores each reading, and remembers the levels of CO it has
Been exposed to over time. the unit goes into alarm mode
When it has been exposed to a " critical" level of CO
(measured in parts per million or " ppm" ) within a specified
Time (measured in minutes).
this Carbon Monoxide Alarm features a permanently
Installed sensor, three colored indicator lights, and an 85dB
Alarm horn. It also has a Silence Feature to temporarily quiet
the alarm horn.