HYJ-60 H beam hydraulic correcting machine/Hydraulic Straightening Machine
 

1. Major technical Parameters of Straightening Machine

a. Width of the wing board: 200-800 mm
b. Thickness of the wing board: 20-60 mm

c. Min height of the former: 350 mm
d. Drive system
    Drive motor: 18.5 kw
    Maximum output torque: 34770 N.m
    Linear velocity of the work piece: 7.496 m/min
e. Hydraulic pressure system
    Drive motor: 11 kw
    Output volume of the oil pump: 25 m1/r
    Maximum system pressure: 25 Mpa
    Normal working pressure: 20 Mpa
 

2. Provide goods and compose parts

a. Main frame of correcting machine: base, left-and-right frame, motor, deceleration machine, guide wheel, up roll, press roll

b. Conveyor roller way: base, 14m roller way and so on

c. Electric control: electric control box

d. Spare parts: switch 2, wrench 1
 

3. Performance

H steel flange hydraulic pressure correcting machine is used for the correction of the flange of H beam. Through the lever principle and elastic recovery, it bends the flange of the I beam or H beam when the beam passing through the hole.

The equipment is made up of electric motor, reductor, driving wheel correcting device, initiative hoist cylinder, former, mainframe, stand, hydraulic system, front/back elevating roller rack of pendulum type and the electric control system. The correcting mechanism is compact, solid and easy to operate.
 

4. Technical files

a. Using manual of the machine (Include electrical schematic)

b. Shipping list

c. The certification of the machine

d. The basis of drawing of the machine