1.Ferrite Magnet Material: ferrite powder, etc.

2.Grade: Y25, Y30, Y30BH, Y35 and so on

3.Size: ring, tile,long stick,cylinder etc.

4.Shape: Ring, Disk, Block, segment, ball,cylinder andas the request of clients

5.Grades:Y10T,Y20,Y25,Y30,Y30BH,Y35(China standard);C1,C5,C8,C11(U.S.A. Standard) HF8/22- HF24/3(Europe standard)

Products manufactured according to ISO9001 quality system;

1). Low cost, high-energy, good electric insulation and excellent resistance to demagnetization.

2).High coercive force, high electric resistance, long-time stability, and economical price.

3). high resistance corrosion,no surface treatment.

4). It's brittle easily, high working temperature,

5). suitble for produce in large-scale.

6).heavey and unconvenient

Isotropic ferrite magnets

Anisotropic ferrite magnets

1). Dry process:

By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.

2). Wet process:

By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.

1). Isotropic ferrite magnets are not oriented and can be magnetized in any direction;

2). Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.

10.Application: Widely used in ammeter, speaker, audio, phone, TV, dynamo, DC permanent magnet motors (used in cars)etc