Model	HGJ-I	HGJ-II	HGJ- III
capacity(Kg/hour)	300-500	600-700	700-850
Material dia(mm)	< 1 & < 5	< 3 & < 5	< 3 & < 5
raw material humidity	≤30%	≤40%	≤55%
Power(Kw)	4	5.5	7.5
Weight(Kg)	1600	1900	2300
Product size(m)	7×1.1×1.1	7.6×1.3×1.3	8×1.5×1.5

Name	Dryer
Packing	Wooden case
Port	Qingdao,Tianjin
Delivery time	Within 15 days
Install	Our technical workers to your country install
FOB price(USD)	2800-20000
Payment	30% T/T in advance and balance by the copy of B/L

1.        Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
2.        Hot air dryer Hot air dryer prepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good reasult of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.
3.This dryer is suitable for drying materials of moisture 30-60%. Wet material is input into the hopper. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper.
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 10% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.
3. Regarding HGJ-315,it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-10% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
4. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
1. Strong drying strength. As materials are highly dispersed in airstream, the entire surface is effective drying area.
2. Drying efficiency is high and the time is short.
3. Simple structure, small footprint, easy to construct and maintain.
4. Large capacity, high thermal efficiency. When drying non-bound water, the thermal efficiency goes up to 60%.
Service
1. Before Sale: help you to set a purchase plan according to your requirment
2. During Sale: accompany you to check the performance of the machine; train technical stuff for you
3. After Sale: Sent artisan to your place and help you with the installation