Characters of DPP-250K High Speed AL/PL Blister Packing Machine:
* All station of this machine adopt separate servo motor driving systems and synchronous control technique of double main shafts, which can ensure its operation of all stations synchronously.
* Merits: Heating & temperature control detecting, overload protection of main motor, detecting the position of coating material for PVC and PTP, detection and control of position & packing material position, auto stop for safety protection in case of any error.
* It has such design, featuring novel and safe outer appearance, good vision and safety in operation. "T" shaped mould guide rail orientation ensure easy moulds changeover convenience in adjusting the traction length and maximum.
* Discharging finished products, collection of defective parts in order, can ensure much convenience in being connected with following more equipments. It's equipped with strap cutting device, which is good for collecting all straps.
* Special register feeding unit has high efficient and reliable performance and also fits for various material in different array. (free to design according blister samples)
* Adoption of PLC control system interlinked with touch screen can ensure digital display of all information in Chinese and in English, auto alarm and display in case of error.
* Its construction design is of both independent bodies, which makes it more convenient to move into elevator or clean room.
* All station of this machine adopt separate servo motor driving systems and synchronous control technique of double main shafts, which can ensure its operation of all stations synchronously.
* Merits: Heating & temperature control detecting, overload protection of main motor, detecting the position of coating material for PVC and PTP, detection and control of position & packing material position, auto stop for safety protection in case of any error.
* It has such design, featuring novel and safe outer appearance, good vision and safety in operation. "T" shaped mould guide rail orientation ensure easy moulds changeover convenience in adjusting the traction length and maximum.
* Discharging finished products, collection of defective parts in order, can ensure much convenience in being connected with following more equipments. It's equipped with strap cutting device, which is good for collecting all straps.
* Special register feeding unit has high efficient and reliable performance and also fits for various material in different array. (free to design according blister samples)
* Adoption of PLC control system interlinked with touch screen can ensure digital display of all information in Chinese and in English, auto alarm and display in case of error.
* Its construction design is of both independent bodies, which makes it more convenient to move into elevator or clean room.
|
Punch frequency |
40-100 time/min(Al/Pl) |
|
|
Max. forming area and depth |
240×220×15mm |
|
|
Stroke adjusting scope |
40-220 |
|
|
Packing material |
Medicine PVC material |
0.25-0.3×250mm |
|
Glue coated PIP Alu. foil |
0.02-0.15×250mm |
|
|
Dialysis paper |
(50-100g/m2)×250mm |
|
|
Clean compressed air |
pressure0.6-0.8 Mpa |
|
|
Air consumption |
≥0.5m3/min |
|
|
Total power |
380V 50hz 11kv |
|
|
Mould cooling water |
Running water or cycling water consumption 60-100L/H |
|
|
Outline size |
5180×980×1895 |
|
|
Weight |
4000kg |
|