Corrugation Sheet Roll Forming Machine, Automatic Roof Steel Tile Roll Forming Machine

1) Production Characteristic and use:
Steel tile roll forming machine adopts new station to increase the solidity of the machine; products are widely used in modern architecture roofing, the product increased the housing aesthetics.

 

4: material of roller: 45# steel , polished and coated with chrome

5:material of main shaft: 45#steel,  diameter roller: Ф80-100mm

7: forming thickness: 0.5mm—1.2mm 195Mpa-550Mpa

10: size of machine: 11500x1800x1400(mm)   L x W x H

(1)   Motorized Pre-cutting: It is used when changing the coil of raw material; it can cut the coil rapidly and time-saving. Power: 1.5KW

(2)   Cutting after forming: Cut the sheet after roll forming to required length

(3)   Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4)   Material of blade: CR12with heat treatment

(5)   Length measuring: Automatic length measuring

Working flow:

Passive /hydraulic decoiler--------guiding&feeding-------rollforming-----length meaurement-----hydraulic cutting-------run out table